Yamaha BRX-610 - Инструкция по эксплуатации - Страница 13

11 

En

PREPARATIONS

Eng

lish

PREPARATIONS

Front speakers (FR and FL):

For the front channel sound (stereo sound) and effect 
sound.

Center speaker (C):

For the center channel sound (dialogue, vocals, etc.).

Surround speakers (SR and SL):

For effect and vocal sound from surround channel. The 
surround back channel sound is output from the surround 
speakers when a disc which has 7.1- or 6.1-channel 
sounds is played back.

Subwoofer (SW):

For low-frequency effect (LFE) sound and bass sound 
from front and surround channels.

Connect speakers to the unit.
When you are using a subwoofer speaker, check if it is 
active (built-in amplifier, with power cable) or passive 
(not built-in amplifier, without power cable). The cable 
used for connecting a subwoofer differs depending on the 
subwoofer type.
After connecting the speakers, setting according to the 
speaker type (size, number of available speakers, etc.) is 
required. See page 39 for speaker setting.

• Disconnect the power plug before connecting speakers.
• When connecting speakers, use speakers having more than 6

Ω

impedance for the front, center and surround speakers, and 4

Ω

to 6

Ω

 impedance for a passive subwoofer. For an active 

subwoofer (built-in amplifier), you need not be concerned about 
impedance.

• When connecting an active subwoofer (built-in amplifier), be 

sure turn it off before connecting to the unit.

• Be careful that the core of the speaker cable does not touch 

anything or come into contact with the metal areas of the unit. 
This may damage the unit or the speakers.

■

Necessary cables (not supplied)

When the subwoofer is passive:
• Speaker cables × 6

When the subwoofer is active:
• Speaker cables × 5

• Monaural pin cable (for subwoofer) × 1

CONNECTION

5.1-channel speaker layout

Connecting speakers

SL

SR

FR

C

SW

FL

Notes

–

+

–

+

–

+

–

+

The rear panel of this unit

(when the subwoofer is passive)