Bosch MFW 3710B - Инструкция по эксплуатации - Страница 19

 19

en

Shredding attachment

4. 

Prepare your food. Chop up large parts 

beforehand so they fit into the feed 

chute without having to press them in.

5. 

Place a suitable container under the 

attachment. Add the prepared food to 

the filling tray.

6. 

Connect the mains plug. Switch on the 

appliance.

7. 

Use the pusher to slide the food down 

the feed chute, applying light pressure.

8. 

Once you have finished, switch off the 

appliance and pull out the mains plug.

9. 

Remove the filling tray and pusher.

10. 

Hold down the release button and turn the 

attachment clockwise until it disengages.

11. 

Remove the attachment, take it apart 

and clean all parts. 

X

 “Care and daily 

cleaning” see page 19

Shredding attachment

For shredding, grating and slicing items 

such as cheese, fruit, vegetables, nuts, 

almonds, dried bread rolls and other hard 

foodstuffs. Select the appropriate insert 

depending on the type and consistency of 

the food to be processed. 

X

 “Tips” see 

page 21

Preparation

W

Risk of injury!

Do not reach into the sharp blades and 

edges of the shredding, grating and slicing 

inserts.

X

Sequence of figures 

H

1. 

Open the cap. Fit the required insert into 

the housing.

2. 

Close the cap until you hear it click into 

position.

The shredding attachment is now prepared.

Use

W

Risk of injury!

– Do not reach into the feed chute with 

your hands.

– Only use the pusher when adding more 

food.

Caution!

– The pusher can only be inserted in one 

direction.

– Remove hard shells (e.g. on nuts).

– Do not apply great force with the pusher.

X

Sequence of figures 

I

1. 

Fit the prepared attachment onto the 

drive of the base unit, holding it at an 

angle.

2. 

Turn the attachment anticlockwise until 

you hear it click into position.

3. 

Fit the filling tray and insert the pusher 

in the feed chute.

4. 

Prepare your food. Chop up large parts 

beforehand so they fit into the feed 

chute without having to press them in.

5. 

Place a suitable container under the 

attachment. Add the prepared food to 

the filling tray.

6. 

Connect the mains plug. Switch on the 

appliance.

7. 

Use the pusher to slide the food down 

the feed chute, applying light pressure. 

The food is now cut up or shredded.

8. 

Once you have finished, switch off the 

appliance and pull out the mains plug.

9. 

Remove the filling tray and pusher.

10. 

Hold down the release button and 

turn the attachment clockwise until it 

disengages.

11. 

Remove the attachment, take it apart 

and clean all parts. 

X

 “Care and daily 

cleaning” see page 19

Care and daily cleaning

The appliance, all attachments and the 

relevant accessories must be thoroughly 

cleaned after each use.

W

Risk of electric shock!

– Disconnect the mains cable from the 

socket prior to cleaning.

– Never immerse the base unit in liquids 

and do not clean in the dishwasher.

W

Risk of injury!

Do not reach into the sharp blades and 

edges of the shredding and slicing inserts.