Bosch YourCollection MUMP1000 - Инструкция по эксплуатации - Страница 18

18

Cleaning and servicing

en

Blender 

X

 Figure 

E

W

Risk of injury from sharp blades / 

rotating drive!

Never place fingers in the attached blender! 

Do not remove / attach the blender until 

the drive is at a standstill! Operate the 

assembled blender only and with the lid 

attached.

W

Risk of scalding!

If processing hot liquids, steam escapes 

through the funnel in the lid. Add a max. 

0.5 litres of hot or frothing liquid.

Warning!

Blender may be damaged. Do not process 

deep­frozen ingredients (except ice cubes). 

Do not operate when empty.

Warning!

Processing liquids in the glass blender: 

maximum setting 3. Add a max. 0.5 litres of 

hot or frothing liquid.

■

Press the Release button and move the 

swivel arm to position 

3

.

■

Remove the blender drive cover.

■

Attach the blender jug (mark on the 

base of the blender jug on the mark 

on the base unit) and rotate as far as 

possible in an anti­clockwise direction.  

X

Fig. 

E

-4/5

■

Add ingredients. 

Maximum capacity of liquid for plastic 

blender = 1 litre,  

for glass blender = 0.75 litres,  

frothing or hot liquid maximum 0.5 litres 

Optimal processing capacity – solids 

= 50­100 g.

■

Attach lid and press firmly. While 

working, always hold the lid firmly with 

one hand. However, do not place hand 

over the refill opening!

■

Set the rotary switch to the desired 

setting. 

Adding more ingredients

X

 Figure 

E

-6

■

Switch off the appliance with the rotary 

switch.

■

Remove the cover and add ingredients

or

■

remove the funnel and gradually add 

solid ingredients through the feed tube

or

■

pour liquid through the funnel.

After using the appliance

Switch off the appliance with the rotary 

switch.

■

Remove mains plug.

■

Rotate the blender in a clockwise 

direction and remove.

Tip:

 It is recommended to clean the blender 

immediately after use.

Cleaning and servicing

Attention!

Do NOT use abrasive cleaning agents. 

Surfaces may be damaged.

Cleaning the base unit

W

Risk of electric shock!

Never immerse the base unit in water or 

place under running water.

■

Remove mains plug.

■

Wipe the base unit with a damp cloth. 

If required, use a little detergent.

■

Then dry the base unit.

Cleaning the bowl and 

accessories 

All parts are dishwasher­safe. Do not 

wedge plastic parts in the dishwasher as 

they could warp.

Cleaning the blender

W

Risk of injury from sharp blades!

Do not touch blender blades with bare 

hands. The blender can be disassembled 

for cleaning.

Warning!

Do NOT use abrasive cleaning agents. The 

blade insert is not dishwasher­safe. Clean 

the blade insert under running water only.