Кондиционеры Immergas 6 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
14
INS
T
ALLER
US
ER
MAINTEN
A
N
C
E TECHNI
CI
AN
TECHNI
CAL D
A
T
A
1.7
HYDRAULIC CONNECTION
In order not to void the warranty, before making indoor unit connections, carefully clean the heating system (pipes, radiators,
etc.) with special pickling or de-scaling products to remove any deposits that could jeopardise proper hydronic module opera-
tion.
LP
GP
RU
MU
RR
R
M
RU
MU
V
RR
R
M
LP
GP
V
5
Key (Fig. 5):
V -
Electrical
connection
RR - System
filling
RU
- Storage tank unit return
MU - Storage tank unit flow
R -
System
return
M -
System
flow
LP
- Chiller line - liquid phase
GP
- Chiller line - gaseous phase
A treatment of the heating and water system water is required, in compliance with the technical standards in force, in order to protect the
system and the appliance from deposits (e.g. scale), slurry or other hazardous deposits.
Water connections must be made in a rational way using the couplings on the indoor unit template.
The manufacturer declines all liability in the event of damage caused by the installation of an automatic filling system.
In order to meet the system requirements established by EN 1717 in terms of pollution of drinking water, we recommend installing the
IMMERGAS anti-backflow kit to be used upstream of the cold water inlet connection of the indoor unit. We also recommend using cat-
egory 2 heat transfer fluid (ex: water + glycol) in the internal unit primary circuit (heating and/or cooling circuit), as defined in standard
EN 1717.
To preserve the duration of appliance efficiency features, in the presence of water whose features can lead to the deposit of lime
scale, installation of the “polyphosphate dispenser” kit is recommended .
1.8
CONNECTING THE CHILLER LINE
As far as connecting the cooling line is concerned, all the instructions contained in the outdoor unit instructions booklet must be fol-
lowed.
Make the connections directly on the indoor unit couplings, or use the rear outlet kit (optional).
1.9
ELECTRICAL CONNECTION
The internal unit has an IPX4D degree of protection; electrical safety of the appliance is achieved only when it is properly connected to an
efficient earthing system, as specified by current safety standards.
The manufacturer declines any responsibility for damage or physical injury caused by failure to connect the indoor unit to an
efficient earthing system or failure to comply with the IEC reference standards.
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
