Bosch TIS 65621 GB - Инструкция по эксплуатации - Страница 22

18

en

Service programmes

Cleaning the brewing unit 

(Figure G)

F

See also the Quick reference guide in 

the storage compartment 

16

.

In addition to the automatic cleaning 

programme, the brewing unit 

14

 should be 

removed regularly for cleaning.

■ Use the main switch 

J

1

 to switch the 

appliance completely off.

■ Open the door 

13 

to the brewing unit.

■ Slide the red latch 

14a

 on the brewing 

unit 

14

 all the way to the left.

■ Press the eject lever 

15

 right down. The 

brewing unit will be released.

■ Take hold of the brewing unit 

14

 by the 

recessed grips and carefully remove it.

F

Important:

 Clean it without using 

washing-up liquid and do not put it in 

the dishwasher.

■ Remove the cover 

14b

 and thoroughly 

clean the brewing unit 

14

 under running 

water.

■ Thoroughly clean the strainer of the 

brewing unit under the water jet.

■ Thoroughly clean the inside of the appli-

ance with a moist cloth, removing any 

coffee residues.

■ Allow the brewing unit 

14

 and the inside 

of the appliance to dry.

■ Replace the cover 

14b

 on the brewing 

unit and then push the brewing unit 

14

back into the appliance until it latches into 

place.

■ Press the eject lever 

15

 right up.

■ Slide the red latch 

14a

 all the way to the 

right and close the door 

13

.

Service programmes

F

See also the Quick reference guide in 

the storage compartment 

16

.

Following prior notification, either 

Descaling necessary

 or

Cleaning necessary

 or  

calc’nClean necessary

. 

appears in display 

3

 at certain intervals.

The unit should immediately be cleaned or 

descaled using the appropriate programme. 

The two processes 

Descale

 and 

Clean

 can 

optionally be carried out together using 

the 

calc’nClean

 function (see the section 

“calc’nClean”). Failure to carry out the 

service programme according to the instruc-

tions may damage the appliance.

Using a water filter increases the intervals 

until a descaling programme needs to be 

performed.

F

Important:

  if descaling is not 

performed on the appliance in good 

time, then the following appears: 

Descaling overdue. Appliance will soon 
be locked --> press menu for 3 sec.

Immediately perform the descaling 

process in accordance with the 

instructions. If the appliance is 

locked, it can only be operated again 

once the descaling process has been 

carried out.