Bosch TIS 65621 GB - Инструкция по эксплуатации - Страница 11

7

en

Display

Mains switch 

J

The mains switch 

J

 is used to switch the 

appliance on or off. The appliance rinses 

itself automatically when it is switched on 

and off.

The appliance does not rinse if:

■ it is still warm when switched on, or

■ no coffee was dispensed before it was 

switched off.

The appliance is ready for use when the 

symbols and the display on the control 

panel are lit.

Control panel (touch field) 

In the control panel you can easily navigate 

the controls just by touching the symbols 

and characters. 

You will hear an audible signal.

These audible signals can be switched on 

or off (see the section “Menu – 

Key tones

”).

Drink selection

Touching the corresponding symbol 

selects the desired drink (see the section 

“Preparing drinks”).

Start/stop button 

Touching 

C

 either begins preparing 

a drink or launches a service programme. 

If you touch 

C

 again while the 

drink is being prepared, dispensing will be 

prematurely halted.

Menu 

Touching 

A

 calls up the menu, the 

navigation symbols will be activated and 

light up. Touch 

I

, 

B

 and 

F

 to 

navigate through the menu and call up 

information or change settings (see the 

section “Menu”).

Drink options 

Touching 

H

 or 

D

 adjusts the strength or 

size of the drink, touching 

G

 prepares two 

cups simultaneously as soon as you touch 

C

 to begin dispensing (see the 

section “Preparing drinks”).

“Favourite” and Childproof lock

Briefly touching 

R

 calls up personalised 

beverages (see the section “Own settings 

Favourite”).

Touching 

R

 for 3 seconds or more 

 activates or deactivates the childproof lock 

(see the section “Childproof lock”). 

Display

The display shows the selected drinks 

and settings plus messages reporting the 

 appliance’s operating status. 

Espresso

Regular 

medium

Please refill water tank

These messages are cleared as soon as 

the action has been carried out.

Initial use

General

Fill the appropriate container using only 

pure, 

cold

, uncarbonated water and solely 

roasted

 beans. Do not use coffee beans 

that have been glazed, caramelised or 

treated with other additives containing 

sugar, since they will block the brewing unit. 

The water hardness setting on the 

 appliance can be adjusted. The factory 

setting for the water hardness is 4. Use 

the enclosed test strip to determine the 

hardness of your water supply. If this 

shows a value other than 4, you will need 

to programme the appliance appropriately 

after it has been taken into service (see 

section “Menu – 

Water hardness

”).