Bosch TIS 65621 GB - Инструкция по эксплуатации - Страница 18

14 

en

Menu

F

Important:

 Be sure to take note of 

the section on “Service programmes”.

Info Service programmes  

(depending on the type of appliance)

Display how many beverages can still be 

prepared before it will be necessary to run 

one of the service programmes.

■

Use 

I

 to display 

Clean af ter --- 

c

 or  

Descale af ter --- 

c

.

■ Touch 

F

 to exit from the display.

F

For technical reasons the counter 

does not represent a precise number 

of cups.

Cof fee-milk ratio

*

The coffee-milk mixing ratio set in the 

factory can be adjusted in several steps.

■

Use 

I

 to select the beverage (only 

for coffee drinks with milk) and confirm 

with 

B

.

■

Use 

I

 to select the desired mixing 

ratio (setting of milk content in %) and 

confirm with 

B

.

■ The setting is saved.

Example:

 If a value of 30% is selected, 

30% milk and 70% coffee will be dispensed.

Items marked * are not present in all 

models.

Favourite

The menu item 

Favourite

 can be used to 

create or change personalised beverages. 

The number of Favourites depends on the 

model of the appliance. 

■

Use 

I

 to select a new or existing 

profile and confirm with 

B

■ Touch the desired beverage and confirm 

with 

B

.

■ Your selection for the beverage settings 

appears on the display depending on the 

beverage, e.g. 

ml

 or 

Cof fee-milk ratio

.

■ Make your settings and confirm with 

B

 each time. 

■ The beverage is now saved in the profile.

Set cup size 

Set up the volume dispensed for each drink 

and each size of cup. The volumes set up in 

the factory can be adjusted stepwise.

■

Use 

I

 to choose a drink and touch 

B

 to confirm your choice.

■

Use 

I

 to choose the desired volume 

and touch 

B

 to confirm your choice.

The setting is then saved.

Water hardness

Set this to the hardness of the local water 

supply.

Level 

1

, 

2

, 

3

, 

4

 or 

Sof tening system

 can be 

selected. The preset level of water hard-

ness is level 

4

. 

■

Use 

I

 to choose the desired water 

hardness and touch 

B

 to confirm 

your choice.

F

It is important to set the water hard-

ness correctly, so that the appliance 

indicates accurately when the 

 descaling programme should be run. 

You can check the water hardness using 

the enclosed test strip or by asking your 

local water supplier. If a water softening 

system is installed in the house, please 

select the 

Sof tening system

 setting.

■ Briefly dip the test strip in the water and 

check the result after one minute.

Level Water hardness

German (°dH) French (°fH)

1

2

3

4

1-7

8-14

15-21

22-30

1-13

14-25

26-38

39-54

Automatic shut-down

Setting how long the appliance should wait 

after the last drink was prepared before it 

automatically switches itself off.

You can specify values from 15 minutes to 

3 hours. The factory setting is 30 minutes.

■

Use 

I

 to choose the desired interval 

and touch 

B

 to confirm your choice.