Ryobi RCS5133CB 5133001860 - Инструкция по эксплуатации - Страница 10

8

| English

●

For a more thorough cleaning, clean in warm soapy 
water. Rinse and let dry completely.

●

Replace with a new air filter after every 25 hours 
of use.

NOTE:

 An alternative method is to clean the air 

fi

 lter  with 

compressed air (always wear eye protection to avoid eye 
injury).
6.  Reinstall the air filter, making sure that the tabs on the 

air filter are properly aligned and positioned.

7.  Reinstall the air filter cover. Push down on the knob and 

rotate clockwise to secure.

8.  Clean the pre-filter every 25 tanks of fuel or sooner, if 

required. Remove the engine cover, starter assembly, 
and fan housing baffle for access to the pre-filter in the 
engine housing. (

See page 335 - 337.)

NOTE:

 If you use an air hose for drying, blow through both 

sides of the 

fi

 lter.

 WARNING

Never run the engine without the air 

fi

 lter. Make sure the 

air 

fi

 lter is correctly placed in the air 

fi

 lter cover before 

reassembly.

INSPECTING AND CLEANING THE CHAIN BRAKE

See page 332.

■

Always keep the chain brake mechanism clean by 
lightly brushing the linkage free from dirt.

■

Always test the chain brake performance after cleaning.

■

Refer to “Operation - Checking and Operating Chain 
Brake” section in this manual for additional information.

ENGINE SPEED AND CARBURETTOR ADJUSTMENT

 WARNING

Incorrect carburettor adjustment may increase the 
risk of injuries, fatal accidents, or product damage. 
For carburettor adjustment, bring the product to an 
authorised service centre.

MAINTENANCE SCHEDULE

Daily check

Fuel mixture

Before each use

Bar lubrication

Before each use

Chain tension

B e f o r e   e a c h   u s e   a n d 
frequently

Clutch engagement
(no chain movement at 
idling speed)

Before each use

Chain sharpness

Before each use, visual 
check

For damaged parts

Before each use

For loose fasteners

Before each use

For loose parts

Before each use

Chain brake function

Before each use

For fuel leaks

Before each use

INSPECT AND CLEAN:

Bar

Before each use

Complete saw

After each use

Air filter

Every 5 hours*

Chain brake

Every 5 hours*

Replace spark plug

Yearly

Replace fuel filter

Yearly

* Hours of Operation

RESIDUAL RISK

Even when the product is used as prescribed, it is still 
impossible to completely eliminate certain residual risk 
factors. The following hazards may arise in use and the 
operator should pay special attention to avoid the following:

■

Injury caused by vibration. Always use the right tool for 
the job, use designated handles and restrict working 
time and exposure. 

■

Exposure to noise can cause hearing injury. Wear ear 
protection and limit exposure.

■

Contact with exposed saw teeth of the chain (cutting 
hazards).

■

Unforeseen, abrupt movement or kickback of the guide 
bar (cutting hazards).

■

Parts ejected from the saw chain (cutting/injection 
hazards).

■

Thrown out pieces of the work piece (wood chips, 
splinters).

■

Inhalation of saw dust and particles or emission from 
the petrol engine.

■

Skin contact with petrol/oil.

RISK REDUCTION

It has been reported that vibrations from handheld tools 
may contribute to a condition called Raynaud’s Syndrome 
in certain individuals. Symptoms may include tingling, 
numbness and blanching of the 

fi

 ngers, usually apparent 

upon exposure to cold. Hereditary factors, exposure to 
cold and dampness, diet, smoking and work practices 
are all thought to contribute to the development of these 
symptoms. There are measures that can be taken by the 
operator to possibly reduce the effects of vibration:

■

Keep your body warm in cold weather. When operating 
the product wear gloves to keep the hands and wrists 
warm. It is reported that cold weather is a major factor 
contributing to Raynaud’s Syndrome.

■

After each period of operation, exercise to increase 
blood circulation.

■

Take frequent work breaks. Limit the amount of 
exposure per day.