Gaggenau IK 366-251 - Инструкция по эксплуатации - Страница 54

01_Gagg_Mag_TXT 18/5/07 10:32 AM Page 52 

C

M

Y

CM

MY

CY CMY

K

The A–Z of Gaggenau hobs

All-gas appliances

 All Gaggenau gas hobs, including

our wok burners, are available for either natural or

LP gas.

Automatic boiling point detection

 The appliance

automatically determines boiling temperature, which

is dependent on the geographical position (height

above sea level).

Automatic fast ignition

 This feature makes switching

on faster and more convenient: press the knob on

the gas hob, rotate to the desired setting and release.

The electronic ignites the flame immediately and

keeps it burning without further intervention – the

knob can be released.

Automatic quick boil

Ceramic hobs

 A selected heat setting is briefly

raised by 4 stages. After approximately 4 minutes the

hob automatically switches back to the original setting.

Individual timings can be set via the options menu,

for example for pans with different base thicknesses.

This function is not a higher power setting than

maximum, but can be relied upon to prevent pans

from boiling over.

Induction hobs

 With these hobs, the power setting is

always raised to maximum, and the timing depends

on the setting selected for the remainder of the

cooking process (longer for higher settings).

Booster function

 Some Gaggenau induction hobs

have a booster function as well as boil-start and

autotimer functions. This increases the output of the

hotplate by 50 per cent for between two and ten

minutes (to 3000 watts in the case of the 21 cm

diameter cooking zone). This function can be

activated for any cooking zone, though only one

hotplate on the left and one on the right may be

activated at the same time. Ideal for rapidly heating

large quantities of water.

Automatic cooking timer

 The time at which you wish

one or more cooking zones to be switched off auto-

matically can be selected up to either 90 (CK) or

99 (CI) minutes in advance. The integral clock can

be used as a timer independently of the function

set for the appliance.

52