Триммеры Makita EM4350RH - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
βλ
TROUBLESHOOTING
Before making a request for repairs, check for trouble by yourselfέ If any abnormality is found, control your machine according to the description
of this manualέ σever tamper or dismount any part contrary to the descriptionέ όor repairs, contact Authorized Service Agent or local dealershipέ
State of abnormality
Probable cause (malfunction)
Remedy
Engine does not startέ
Iάτ switch is set to STτPέ
Set the Iάτ switch to τPERATIτσέ
όailure to operate primer pumpέ
Push ι to 1ί timesέ
δow pulling speed of starter ropeέ
Pull stronglyέ
δack of fuelέ
όeed fuelέ
Clogged fuel ilterέ
Cleanέ
Bent fuel tubeέ
Straighten fuel tubeέ
Deteriorated fuelέ
Deteriorated fuel makes starting more dificultέ
Replace with new fuelέ (Recommended
replacementμ 1 month)
Excessive suction of fuelέ
Set throttle lever from medium speed to high
speed, and pull starter handle until engine
startsέ
Once engine starts, cutting tool
starts rotating.
Pay full attention to cutting
tool.
If engine will not start still, remove spark plug,
dry the electrode, and reassemble them as
they originally areέ Then, start as speciiedέ
Detached plug capέ
Attach securelyέ
Contaminated spark plugέ
Cleanέ
Abnormal clearance of spark plugέ
Adjust clearanceέ
τther abnormality of spark plugέ
Replaceέ
Abnormal carburetorέ
εake request for inspection and maintenanceέ
Starter rope cannot be pulledέ
εake request for inspection and maintenanceέ
Abnormal drive systemέ
εake request for inspection and maintenanceέ
Engine stops soonέ
Engine speed does not increaseέ
Insuficient warmάupέ
Perform warmάup operationέ
Choke lever is set to “CδτSE” although
engine is warmed upέ
Set to “τPEσ”έ
Clogged fuel ilterέ
Cleanέ
Contaminated or clogged air cleanerέ
Cleanέ
Abnormal carburetorέ
εake request for inspection and maintenanceέ
Abnormal drive systemέ
εake request for inspection and maintenanceέ
εetal blade does not rotateέ
Stop engine immediatelyέ
δoosened metal bladeάtightening nutέ
Tighten securelyέ
Twigs caught by metal blade or dispersionά
preventing coverέ
Remove foreign matterέ
Abnormal drive systemέ
εake request for inspection and maintenanceέ
εain unit vibrates abnormallyέ
Stop engine immediatelyέ
Broken, bent or worn metal bladeέ
Replace metal bladeέ
δoosened metal bladeάtightening nutέ
Tighten securelyέ
Shifted convex part of metal blade and metal
blade support ittingέ
Attach securelyέ
Abnormal drive systemέ
εake request for inspection and maintenanceέ
εetal blade does not stop immediatelyέ
Stop engine immediatelyέ
ώigh idling rotationέ
Adjustέ
Detached throttle wireέ
Attach securelyέ
Abnormal drive systemέ
εake request for inspection and maintenanceέ
Engine does not stopέ
Run engine at idling, and set choke lever
to “CδτSE”έ
Detached connectorέ
Attach securelyέ
Abnormal electric systemέ
εake request for inspection and maintenanceέ
Downloaded from
manuals search engine
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
