Makita EM4350RH - Инструкция по эксплуатации - Страница 27

βι

WARNINGμ

The engine is still hot just after stopping engine. When draining the fuel, allow suficient time for the engine 

to cool down after stopping it. Otherwise a skin burn and/or ire may result.

DANGERμ 

 When the machine is kept out of operation for a long time, drain all fuel from the fuel tank and carburetor, 

and keep it at a dry and clean place.

●

Drain  fuel  from  the  fuel  tank  and  carburetor  according  to  the  following 

procedureμ
1)  Remove the fuel tank cap, and drain fuel completelyέ

If  there  is  any  foreign  matter  remaining  in  the  fuel  tank,  remove  it 

completelyέ

β)  Pull out the fuel ilter from the reill port using a wireέ
γ)  Push the primer pump until fuel is drained from there, and drain fuel coming 

into the fuel tankέ

ζ)  Put the ilter to the fuel tank, and securely tighten the fuel tank capέ
η)  Then, continue to operate the engine until it stopsέ

●

Remove the spark plug, and drip several drops of engine oil through the spark 

plug holeέ

●

ύently pull the starter handle so that engine oil will spread over the engine, and 

attach the spark plugέ

●

Attach the cover to the metal bladeέ

●

In general, store the machine as illustratedέ Pay full attention how to store the 

machine  to  prevent  the  straight  shaft  from  fallingέ  τtherwise  it  may  result  in 

personal injuryέ  

●

Keep the drained fuel in a special container in a wellάventilated shadeέ

STORAGE

Attention after long-time storage

●

Before startup after longάtime shutdown, be sure to replace oil (refer to Pέ βγ)έ τil will deteriorate while the machine is kept out of operationέ

Downloaded from 

www.Manualslib.com

manuals search engine