Проигрыватели Samsung BD-P1000 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
20 - English
C
onnections
■
Depending on your TV, certain HDMI output
resolutions may not work.
■
Please refer to the user's manual of your TV.
■
If an HDMI or HDMI-DVI cable is plugged into TV,
the Blu-ray disc player’s output is set to HDMI/DVI
automatically about 10 seconds later.
■
If Component and HDMI are both connected,
HDMI mode is automatically selected.
(If HDMI is connected in Component mode or
video mode, the video output mode automatically
switches to HDMI mode.)
■
Blu-ray Disc Playback is available with this
connection in 720p or 1080i or 1080p resolution
NOTE
■
Blu-ray Disc Playback is available with this
connection in 720p or 1080i or 1080p
resolution
NOTE
Connecting to a TV with HDMI Cable
1. Using the HDMI-HDMI cable connect the HDMI OUT
terminal on the rear of the Blu-ray disc player to the
HDMI IN terminal of your TV.
2. Press the TV OUT SELECT button on the front panel
of the unit until the HDMI indicator lights. Make sure
the unit is in Stop mode.
3. Press the input selector on your TV remote control
until the HDMI signal from the Blu-ray disc player
appears on your TV screen.
• If you have set the remote control to properly operate
with your TV (pages 15~16), press the INPUT SEL.
button on the remote control and select HDMI as the
external source of the TV.
HDMI Auto Detection Function
Connecting the HDMI cable while the unit power is on,
will automatically change the video output mode to
HDMI mode.
HDMI cable
(Included)
Connecting to a TV with DVI Cable
1. Using the HDMI-DVI cable, connect the HDMI OUT
terminal on the rear of the Blu-ray disc player to the
DVI IN terminal of your TV.
2. Using the audio cables, connect the AUDIO (red and
white) OUT terminals on the rear of the Blu-ray disc
player to the AUDIO (red and white) IN terminals of
your TV.
Turn on the Blu-ray disc player and TV.
3. Press the TV OUT SELECT button on the front panel
of the unit until the HDMI indicator lights. Make sure
the unit is in Stop mode.
4. Press the input selector on your TV remote control
until the DVI signal from the Blu-ray disc player
appears on your TV screen.
• If you have set the remote control to properly operate
with your TV (pages 15~16), press the INPUT SEL.
button on the remote control and select HDMI as the
external source of the TV.
RED
WHITE
RED
WHITE
Audio Cable
HDMI-DVI cable
(Not Included)
229L_P1000_XER_ENG_IB_1~38 12/22/06 4:03 PM Page 20
