Проигрыватели Samsung BD-P1000 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
G
etting Started
English - 15
English
Unpacking
Accessories
Check for the supplied accessories below.
Preparing the Remote Control
Install Batteries in the Remote Control
•
Open the battery cover on the back of the remote control.
•
Insert two AAA batteries. Make sure that the polarities
(+ and -) are aligned correctly.
• Close
the battery cover.
If the remote does not operate properly:
•
Check the polarity + - of the batteries (Dry-Cell)
•
Check if the batteries are drained.
•
Check if remote sensor is blocked by obstacles.
•
Check if there is any fluorescent lighting nearby.
Dispose of batteries according to local environmental
regulations. Do not put them in the household trash.
Component Cable
HDMI Cable
Composite (Video),
Audio L/R Cable
Batteries for Remote
Control (AAA Size)
Remote Control
Instruction Manual
Quick Guide
Setting the Remote Control
You can control certain functions of another
manufacturer’s TV with this remote control.
Control function buttons include: TV STANDBY/ON,
PROG
, VOL + -, TV MUTE, INPUT SEL. button.
To determine whether your television is
compatible, follow the instructions below.
1. Switch your television on.
2. Point the remote control towards the television.
3. Press and hold the TV STANDBY/ON button and
enter the two-figure code corresponding to the
brand of your television, by pressing the
appropriate number buttons.
Result: If your television is compatible with the remote
control, it will switch off.
It is now programmed to operate with the
remote control.
■
If several codes are indicated for your
television brand, try each one in turn until
you find one that works.
■
If you replace the remote control's batteries,
you must set the brand code again.
NOTE
Then you can control the television using the following
buttons after pressing the TV button.
Button
Function
TV STANDBY/ON
Used to switch the television on and off.
INPUT SEL.
Used to select an external source.
VOL (+ -)
Used to adjust the volume of the television.
PROG (
)
Used to select the desired channel.
TV MUTE
Used to toggle the sound on and off.
■
The functions listed above will not necessarily
work on all televisions. If you encounter
problems, operate the television directly.
NOTE
229L_P1000_XER_ENG_IB_1~38 12/22/06 4:03 PM Page 15
