Canon LBP233 - Инструкция по эксплуатации - Страница 76

Setting Device Information

This explains the procedure for setting options installed in the device and making functions exclusive to the

device usable.

First, select the configuration profile that matches the printer model on the [Device Settings] sheet. The settings

for using the device functions are displayed on the [Device Settings] sheet. Next, set the device function and

option information. If you can use the acquire device information function, the function and option information

of the device can be set automatically.

Perform a response according to the situation as shown below.

●

If you installed using the installer with a network connection:
Normally, when installing, device information is acquired, and the configuration profile and device function

and option information is automatically set. According to the following procedure, check that the

configuration profile that matches the printer model is applied and that [Device Information] is set to [Auto].

●

If you installed using the installer with a USB connection:
During installation, the configuration profile corresponding to the printer model is automatically set. The

acquire device information function may not be supported when the device is connected via USB, depending

on the device, driver, or environment. According to the following procedure, check that the configuration

profile that matches the printer model is applied and set the device function and option information

manually.

●

If the device information was not acquired during installation, or if you cannot use the device
functions and options:
According to the following procedure, set the configuration profile and device function and option

information automatically or manually.

●

If you have added an option to the device:
According to the following procedure, check that the configuration profile that matches the printer model is

applied and set the added option automatically or manually.

●

If you change the printer model you are using:
After changing the port, and set the configuration profile and device function and option information

automatically or manually, according to the following procedure.

Prerequisites

●

Settings at the device

- If the device is connected via a WSD port, [Use WSD Browsing] is already set to on.
- If the device is connected by specifying a standard TCP/IP port, [Retrieve Printer Mngt. Information from

Host] is already set to on.

For details, refer to the manual of the device.

●

When starting the computer, log on as a member of Administrators.

●

When changing the printer model you are using, change the settings for the printing port.

Procedures

1

Display the printer properties screen.

If displaying from [

 Settings] in the Start menu

(1) Display [Bluetooth & devices] (or [Devices]).

Linking the Driver and the Device

72