Принтер Canon LBP233 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Cannot use the acquire device information function or
authentication function
If you cannot acquire the device information, or cannot use the department ID management function or the
user authentication function, check the following.
Cause 1.
The device is turned off, or the cable is not plugged in properly.
Remedy
Check the status of the device.
Cause 2.
The settings for your connection environment have not been configured correctly.
Remedy
Confirm the printable area of the device, and correct the print data in the application you are using.
In a print server environment
●
Install the Canon Driver Information Assist Service in the server computer using the driver installer.
●
Install TCP/IP as a protocol in your environment from the CD-ROM for the operating system you are using.
When the device is connected in a USB connection or port connection environment
You cannot use the acquire device information, department ID management, and user authentication
functions. Also, you cannot use them in the following port connection environments:
●
An environment in which the computer is directly connected to the device using the SMB function
●
An environment in which [Enable printer pooling] in the [Ports] sheet of the printer properties screen of
Windows * is enabled
Use another connection environment such as a TCP/IP network connection environment for the acquire
device information, department ID management, and user authentication functions.
However, the functions may be able to be used via a USB connection, depending on the device or driver you
are using.
Cause 3.
The name of the device is too long.
Remedy
Confirm that the name of the device registered in the printer list of Windows does not exceed the following
number of characters.
●
Device name: within 209 characters
●
Share name: within 260 characters
If it exceeds the above numbers, change the name in the [General] or [Sharing] sheet of the Windows printer
properties screen *.
Troubleshooting
193
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
