Принтер Canon LBP233 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Change the settings and try again.
Cause
[Store] or [Hold] is specified as the output method for printing. [Store in Mail Box] is not allowed in the
print restrictions.
Remedy
Deselect the Store or Hold mode. Alternatively, contact the device restriction administrator.
The [Device IP Address/Host Name] has not been entered.
Enter the [Device IP Address/Host Name].
Cause
[OK] was clicked without specifying [Device IP Address/Host Name].
Remedy
Specify [Device IP Address/Host Name] before clicking [OK].
Could not set the user information because the network settings are incorrect.
Contact the administrator for details.
Cause
The IP address/host name set in the Access Management System Printer Driver Add-in is incorrect, or
there is a problem in the network settings.
Remedy
Check the IP address/host name settings in the [Set IP Address/Host Name] dialog box and the network
settings, and retrieve the user information again. If you still cannot retrieve the information, contact the
AMS administrator.
Could not set the user information because the device is not responding.
Make sure that the device is turned on and try to set the information again later.
If the same error occurs, contact the administrator for details.
Cause
Could not communicate with the device for an unspecified reason. There may be a problem with the
communication environment, such as the network settings or network connection.
Remedy
Try setting the user information again after confirming that the power of the device is turned ON and the
LAN cable, etc., is connected correctly. If you still cannot set the user information, contact the AMS
administrator.
Characters that cannot be used have been entered for the Domain Name
[Authentication]. Check the entered characters.
Cause
If you are using local device authentication, an authentication server other than [This Device] is selected in
[Authentication]. If you are using Active Directory authentication, invalid characters are used in the
domain name entered in [Authentication].
Remedy
If you are using local device authentication, select [This Device] in [Authentication]. If you are using Active
Directory authentication, confirm and enter the correct domain name.
The set user information and obtained restriction information do not match.
Set the user information again.
For Domain Authentication,
enter the NetBIOS domain name in [Authentication].
Cause
The user information set for the Access Management System Printer Driver Add-in and the user
information set in the retrieved restriction information does not match.
Troubleshooting
200
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
