KitchenAid 5KSM7990XESL - Инструкция по эксплуатации - Страница 6

English

6

To Attach Bowl
1. Turn Speed Control Lever to “0” (off).
2. Unplug Stand Mixer or disconnect power. 
3. Raise Guard.
4. Place Bowl Lift Lever in down position.
5. fit Bowl Supports over Locating Pins.
6.  Press down on back of bowl until  

bowl pin snaps into spring latch.

7. Lower Guard.
8. Raise bowl before mixing.

To Remove Bowl
1. Turn Speed Control Lever to “0” (off).
2.  Unplug Stand Mixer or disconnect  

power.

3.   Raise  Guard.

4. Place Bowl Lift Lever in down position.
5.  Remove flat Beater, Wire Whip,  

or Dough hook.

6.  Grasp Bowl handle and lift straight 

up and off Locating Pins. 

To Raise Bowl

1.  Rotate lever counterclockwise  

to straight-up position.

2.  Bowl must always be in raised, locked  

position when mixing.

NOTE: If bowl is not securely snapped 

into place, the bowl will be unstable and 

wobble during use. 

SETTING UP YOUR STAND MIXER

Assembling Your Stand Mixer

W10308298C_01_EN.indd   6

7/19/12   4:40 PM