Philco PHEM1000 - Инструкция по эксплуатации - Страница 18

16

Revision 06/2014

Copyright © 2014, Fast ČR, a. s.

EN

LONG COFFEE (LUNGO, LARGE COFFEE)

The fl avour of lungo coffee is much fi ner than the strong fl avour of espresso 
coffee.

1)  Press the long coffee icon (large coffee).
2)  Pressing the dial button you will start the grinder. At this moment, you can 

turn the same button to adjust the amount of ground coffee.

The default amount of ground coffee for a long coffee: 

3)  While the coffee is brewing, you can use the dial button to adjust the 

volume of the brewed beverage.

Default volume of a long coffee: 150 ml

4)  As soon as the here shown picture appears on the display, the long coffee 

is ready.

HOT WATER (HOT WATER)

You can adjust the temperature of the hot water to three levels: high, medium 
and low.

1)  Press the hot water icon (hot water).
 

The default temperature level for hot water: medium.

2)  If the temperature of the water is set to the medium level, its temperature 

can be increased by turning the dial button to the right.

3)  If the temperature of the water is set to the medium level, its temperature 

can be decreased by turning the dial button to the left.

4)  While heating hot water, its volume can be adjusted using the dial button.
 

Default volume of hot water: 200 ml

CAPPUCCINO

• 

While brewing cappuccino coffee, steam will be released from the spout. 
Avoid coming into any kind of contact with steam – risk of scalding.

• 

Before brewing cappuccino or latte coffee, hot milk and foamed milk, 
check that milk is being supplied to the frother via a hose.

• 

To achieve the optimal quality of foamed milk, use milk with a temperature 
below 10 °C.

• 

If the espresso machine is set to the energy saving mode, it is necessary 
to activate the independent heater to create steam. It is not possible to skip 
this process.

1

2

LONG COFFEE

3

4

1

2

3

4

1

2

3