Philco PHEM1000 - Инструкция по эксплуатации - Страница 10

8

Revision 06/2014

Copyright © 2014, Fast ČR, a. s.

EN

1)  Open the lid of the water tank.
2)  Take out the water tank.
3)  Fill the water tank with room temperature drinking water, put the water tank back into the espresso machine.
4)  Close the lid of the water tank.

Inserting the water fi lter

If you live in an area with hard water exceeding 10°dH, it is recommended to use a water fi lter.
You can purchase these fi lter in specialised electrical appliance stores or contact their manufacturer directly.
Detailed information about the installation, cleaning and replacement of a water fi lter is provided in the chapter 
Water fi lter on pg. 25.

Controlling the fi neness of ground coffee

• 

Set the grinding fi neness for the coffee beans according to the type of coffee 
bean coffee.

• 

Only adjust the fi neness of the grind while the grinder is running as this will 
avoid damaging it.

• 

We recommend a coarse grind setting for dark-coloured coffee beans.

• 

We recommend a fi ne grind setting for light-coloured coffee beans.

• 

If your coffee is fl owing out slowly during the brewing process (or is not fl owing 
at all), set a coarser grind setting.

• 

If your coffee is fl owing out too quickly and the colour is too light, set a fi ner 
grind setting.

NOTE: 
Setting the fi neness of the grid will show itself only after brewing 2 cups of coffee.

FINE

MEDIUM

COARSE