Кофеварка Philco PHEM1000 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
12
Revision 06/2014
Copyright © 2014, Fast ČR, a. s.
EN
Quick parameter settings for brewing beverages
When brewing coffee, it is possible to quickly set the 8 parameters listed below.
•
Amount of ground coffee for brewing a beverage.
•
Volume of the brewed coffee.
•
Milk frothing time when brewing a cappuccino.
•
Milk heating time when brewing a latte.
•
Temperature of the prepared hot water.
•
Volume of the prepared hot water.
•
Milk heating time when making hot milk.
•
Milk heating time when making foamed milk.
The strength or volume of the brewed coffee can be temporarily set before or during the brewing process.
This setting will not be stored.
Information about changes to the default parameters can be found in chapter Beverage settings.
1) While the coffee is being ground, you can use the dial button to select
the amount of ground coffee that will be used for the beverage currently
being brewed – adjusting its strength. Turning to the left you will lower
the coffee strength to MILD , turning to the right you will increase the
coffee strength to STRONG
. The default coffee strength is set to the
medium value of NORMAL
.
2) While making an espresso, cappuccino, long coffee (lungo) and caffè latte
you can set the volume of the brewed coffee using the dial button. If for
example the default volume is set to 40 ml, then by turning two steps to
the left you will reduce the volume to 35 ml, while turning it by two steps
to the right you will increase it to 45 ml.
3) While making a cappuccino it is possible during the milk frothing process
to set the time of this frothing using the dial button. If for example the
default time is set to 20 seconds, then turning it 2 steps to the left you will
shorten the milk frothing time to 19 seconds, while turning it by 2 steps to
the right you will extend it to 21 seconds.
4) While making a caffè latte it is possible during the milk heating process to
set the heating time using the dial button. If for example the default time
is set to 20 seconds, then turning it 2 steps to the left you will shorten the
milk heating time to 19 seconds, while turning it by 2 steps to the right
you will extend it to 21 seconds.
5) Before heating hot water, its temperature can be adjusted using the dial
button. Turn to the left to reduce the temperature to LOW, turn to the right
to increase the temperature to HIGH. The default temperature is set to the
medium value of NORMAL.
6) While heating hot water, its volume can be adjusted using the dial button.
If for example the default volume is set to 150 ml, then by turning two
steps to the left you will reduce the volume to 145 ml, while turning it by
two steps to the right you will increase it to 155 ml.
3
4
5
6
1
2
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
