Makita PLM5113N - Инструкция по эксплуатации - Страница 9

9

• Stop the engine and disconnect the spark plug wire, 

make sure that all moving parts have come to a 
complete stop and, where a key is fitted remove the 
key:

- whenever you leave the lawn mower;
- before refueling.

• Reduce the throttle setting during engine shut down 

and, if the engine is provided with a shut-off valve, turn 
the fuel off at the conclusion of mowing.

• Only use the lawn mower for the purpose for which it is 

designed, for cutting and collecting grass. Any other 
use can be hazardous, causing damage to the 
machine.

Maintenance and storage

• Keep all nuts, bolts and screws tight to be sure the 

equipment is in safe working condition.

• Never store the equipment with petrol in the tank inside 

a building where fumes can reach an open flame or 
spark.

• Allow the engine to cool before storing in any 

enclosure; Clean and maintain the lawn mower before 
storage.

• To reduce the fire hazard, keep the engine, silencer, 

battery compartment and petrol storage area free of 
grass, leaves, or excessive grease.

• Check the grass catcher frequently for wear or 

deterioration.

• Replace worn or damaged parts for safety.
• If the fuel tank has to be drained, this should be done 

outdoors.

• Improper maintenance, use of non-conforming 

replacement components, or the removal or 
modification of safety components can damage the 
lawn mower and injure the operators seriously.

• Only use the recommended blades and spare parts by 

the manufacturer. The use of non-genuine parts can 
damage the machine and injure the operators. Keep 
the lawn mower in good working condition.

• If the blade stopping device doesn’t work, please 

contact service center for help.

Transportation and handling

• Whenever the machine is to be handled, raised, 

transported or tilted you must:

- wear strong working gloves;
- grasp the machine at the points that offer a safe grip, 

taking account of the weight and its distribution;

- use an appropriate number of people for the weight 

of the machine and the characteristics of the vehicle 
or the place where it has to be placed or collected.

• During transport, fasten the machine securely with 

ropes or chains.

WARNING:

 Do not touch rotating blade.

WARNING:

 Refuel in a well ventilated area with 

the engine stopped.

3. PARTS DESCRIPTION (Fig. 1)

Including

A: Spark plug wrench
B: Mulching wedge
C: Discharge guide for side discharge

1.

Upper handle 

2.

Stop control handle

3.

Self-drive control handle

4.

Engine speed lever

5.

Starter handle

6.

Rope guide

7.

Grass catch bag

8.

Height adjusting lever

9.

Deck

10. Spark Plug
11. Fuel cap
12. Oil cap

13. Cable clamp
14. Locking knob
15. Speed adjusting lever
16. Sideward flap for side discharge