Bosch 0.601.613.608 - Инструкция по эксплуатации - Страница 20

20

 | English 

1 619 929 J79 | (23.11.11)

Bosch Power Tools

Choose a suitable guide bushing, depending on the thickness 

of the template or the pattern. Because of the projecting 

height of the guide bushing, the template must have a mini-

mum thickness of 8 mm.
Actuate the release lever 

46

 and insert the guide bushing 

47

from below into the guide bushing adapter 

44

. Ensure that 

the encoding keys clearly engage in the grooves of the guide 

bushing.

f

Select a router bit with a diameter smaller than the in-

terior diameter of the guide bushing.

To ensure that the distance from router bit centre and guide 

bushing edge is uniform, the guide bushing and the guide 

plate can be adjusted to each other, if required.
– Push the release lever 

22

 down and guide the router to the 

stop in the direction of the base plate 

12

. Let go of the re-

lease lever 

22

 again, in order to lock this plunging depth.

– Unscrew the countersunk head screws 

49

. Screw the pan 

head screws 

48

 into the holes intended for this purpose in 

such a manner that the guide plate 

9

 can be moved freely.

– Insert the centring pin 

50

 into the tool holder as shown in 

the figure. Hand-tighten the tightening nut so that the cen-

tring pin can still be moved freely.

– Align the centring pin 

50

 and the guide bushing 

47

 to each 

other by slightly moving the guide plate 

9

.

– Tighten the pan head screws 

48

.

– Remove the centring pin 

50

 from the tool holder.

– Push the release lever 

22

 and guide the plunge router to 

the uppermost position.

For routing with the guide bushing 

47

 proceed as follows:

– Guide the switched on power tool with the guide bushing 

toward the template.

– Push the release lever 

22

 down and slowly lower the 

plunge router until the adjusted depth-of-cut is reached. 

Let go of the release lever 

22

 again to lock this cutting 

depth.

– Guide the switched on power tool with the protruding 

guide bushing alongside the template applying lateral 

pressure.

Maintenance and Service

Maintenance and Cleaning

f

Before any work on the machine itself, pull the mains 

plug.

f

For safe and proper working, always keep the machine 

and ventilation slots clean.

f

In extreme conditions, always use dust extraction as 

far as possible. Blow out ventilation slots frequently 

and install a residual current device (RCD). 

When work-

ing metals, conductive dust can settle in the interior of the 

power tool. The total insulation of the power tool can be im-

paired.

If the replacement of the supply cord is necessary, this has to 

be done by Bosch or an authorized Bosch service agent in or-

der to avoid a safety hazard.

If the machine should fail despite the care taken in manufac-

turing and testing procedures, repair should be carried out by 

an after-sales service centre for Bosch power tools.
In all correspondence and spare parts order, please always in-

clude the 10-digit article number given on the type plate of 

the machine.

After-sales Service and Customer Assistance

Our after-sales service responds to your questions concern-

ing maintenance and repair of your product as well as spare 

parts. Exploded views and information on spare parts can al-

so be found under:

www.bosch-pt.com

Our customer service representatives can answer your ques-

tions concerning possible applications and adjustment of 

products and accessories.

Great Britain

Robert Bosch Ltd. (B.S.C.)

P.O. Box 98

Broadwater Park

North Orbital Road

Denham

Uxbridge

UB 9 5HJ

Tel. Service: +44 (0844) 736 0109

Fax: +44 (0844) 736 0146

E-Mail: boschservicecentre@bosch.com

Ireland

Origo Ltd.

Unit 23 Magna Drive

Magna Business Park

City West

Dublin 24

Tel. Service: +353 (01) 4 66 67 00

Fax: +353 (01) 4 66 68 88

Australia, New Zealand and Pacific Islands

Robert Bosch Australia Pty. Ltd.

Power Tools

Locked Bag 66

Clayton South VIC 3169

Customer Contact Center

Inside Australia:

Phone: +61 (01300) 307 044

Fax: +61 (01300) 307 045

Inside New Zealand:

Phone: +64 (0800) 543 353

Fax: +64 (0800) 428 570

Outside AU and NZ:

Phone: +61 (03) 9541 5555

www.bosch.com.au

Republic of South Africa
Customer service

Hotline: +27 (011) 6 51 96 00

OBJ_BUCH-203-004.book  Page 20  Wednesday, November 23, 2011  9:50 AM