Факсы Brother MFX-1200 ч.2 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
2.17
Basic operation
Combine
Note: This feature is available only for MFX-1600 model.
This feature allows you to copying from four one-sided originals to one sheet of
paper.
1
Make sure the machine is in the Copy mode.
2
Place your original document in ADF face up, or on the FBS glass face down.
3
Enter the document size by pressing the
DOCUMENT SIZE
.
4
Press
ADVANCED FUNCTIONS
twice,
ENTER
. The
LCD
shows the current setting:
Note: This feature is Off for default setting. However, you can turn on it for
the default. (See page 4.7.)
5
Press
or
until the setting you want appears.
In this example, we ve chosen On.
6
Press
ENTER
to save the setting. The machine return to the standby mode
with following display:
7
As needed, set the following:
Select document type and adjust image contrast
Enter the number of copies
Set copy reduction or enlargement ratio
8
Press
START
.
Note: To reset the copy parameter to default setting, press
COPY RESET
.
Note: To stop the copying, press
STOP
.
Ultra copy mode
Note: This feature is available only for MFX-1600 model.
Note: The enlargement/Reduction copy is not available with this mode.
Note: This mode needs more memory than normal mode. So when you try to make
many copies at a time, the memory overflow may occur.
This feature allows you to copying with more high quality resolution.
1
Make sure the machine is in the Copy mode.
2
Place your original document in ADF face up, or on the FBS glass face down.
3
Enter the document size by pressing
DOCUMENT SIZE
.
4
Press
ADVANCED FUNCTIONS
three times,
ENTER
. The
LCD
shows the current
setting:
5
Press
or
until the setting you want appears.
In this example, we ve chosen On.
6
Press
ENTER
to save the setting. The machine return to the standby mode
with following display:
7
As needed, set the following:
Select document type and adjust image contrast
Enter the number of copies
8
Press
START
.
Note: To reset the copy parameter to default setting, press
COPY RESET
.
Note: To stop the copying, press
STOP
.
Copy <Ultra Copy> 1
Ltr [ Ltr ] 100%
Ultra Copy :On
←
←
/
→
→
/Enter
Ultra Copy :Off
←
←
/
→
→
/Enter
Copy <Combine> 1
Ltr [ Ltr ] 100%
Combine :On
←
←
/
→
→
/Enter
Combine
:Off
←
←
/
→
→
/Enter
