Факсы Brother MFX-1200 ч.2 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
2.13
Basic operation
Stacking multiple copies
1
Press
COPY
/
FAX
to change to Copy mode.
2
Turn the sort setting off. (See page 2.16.)
Note: The default setting of sorting is on.
3
Place your original document in ADF face up, or on the FBS glass face
down just as you would to send a fax.
4
Enter the document size by pressing the
DOCUMENT SIZE
.
5
Using the numeric keypad to enter the number of copies you want (up to 99).
6
As needed, set the following:
Select document type and adjust image contrast
Set copy reduction or enlargement ratio
Note: For details about each items, see Making copy settings, page 2.15.
7
Press
START
.
Note: To stop the copying, press
STOP
.
Sorting multiple copies (using ADF)
Note: You cannot use the FBS glass for sorting multiple copies.
1
Press
COPY
/
FAX
to change to Copy mode.
2
Make sure the sort setting is turned on. (See page 2.16.)
3
Place your original document in ADF face up, just as you would to send a
fax.
4
Enter the document size by pressing the
DOCUMENT SIZE
.
5
Using the numeric keypad to enter the number of copies you want (up to 99).
6
As needed, set the following:
Select document type and adjust image contrast
Set copy reduction ratio
Note: For details about each items, see Making the copy settings, page 2.15.
7
Press
START
.
Note: To stop the copying, press
STOP
.
Enlarged or reduced copies
Your fax machine is capable of enlargement and reduction when copying.
Note: The copy enlargement and reduction rate setting is available only for copy-
ing, not for faxing.
Important: Copy enlargement is available only for copying using the
FBS
; it is not
available for copying using the
ADF
.
1
Press
COPY
/
FAX
to change to Copy mode.
2
Place your original document in ADF face up, or on the FBS glass face
down just as you would send a fax.
Note: If you want to enlarged copy, use
FBS
glass.
3
Enter the document size by pressing the
DOCUMENT SIZE
.
4
Choose an enlargement or reduction ratio using
or
of the cursor key.
You can reduce to 78%, 64 % or 50 % of the original size
O R
You can enlarge to 129% or 200 %
O R
Press
ZOOM
to turn the
ZOOM
light on, and adjust the ratio at 1% steps using
or
of the cursor key. You can enter the ratio between 50% and 200%.
O R
Directly enter any percentage between 50 % and 200 % by following proce-
dure.
1. Press #.
2. Using the numeric key to enter your desired ratio (50 to 200).
3. Press # again.
129%: Half-letter (5.5
″
8 . 5
″
)
→
Letter (8.5
″
1 1
″
)
78%: Legal (8.5
″
1 4
″
)
→
Letter (8.5
″
1 1
″
)
Helpful Tip: You can set the copy reduction or enlargement ratio to Auto .
(See Setting copy auto, page 4.7.) If the Auto is set and you
set the document size by pressing
DOCUMENT SIZE
, the machine
automatically reduce or enlarge the original size (you entered)
to fit on the paper size you selected.
5
As needed, set the following:
Select document type and adjust image contrast
Enter the number of copies
6
Press
START
.
Note: To reset the copy parameter to default setting, press
COPY RESET
.
Note: To stop the copying, press
STOP
.
