De Dietrich DOP8360G - Инструкция по эксплуатации - Страница 52

19

• 

4

 CARE

DISASSEMBLY AND REASSEMBLY 

OF THE "SENSOR" PLATE (FIG. D)

You  can  dismantle  the  "SENSOR"  plate 

indicating the presence of a humidity 

sensor linked to the CHEF mode as it 

is not essential for operation. Use the 

plastic  wedge  supplied  to  dismantle  the 

door glass.

Disassembly :
Slide  the  plastic  wedge  between  the 

"SENSOR" plate and the top of the oven 

and  make  a  downward  movement  to 

unclip it.

Reassembly :

Grasp the "SENSOR" plate and 

firmly  insert  the  notches 

A

 into the 

corresponding slots upwards. 

PYROLYTIC SELF-CLEANING

This  oven  is  equipped  with  a  pyrolytic 

self-cleaning function:

Pyrolysis  is  a  cycle  during  which  the 

oven cavity is heated to a very high 

temperature in order to eliminate soiling 

from splattering and spills.

Before  starting  pyrolysis  cleaning, 

remove any large overspills, if any. 

Remove the excess grease on the door 

using a damp sponge. 

As a safety measure, cleaning only 

occurs after the door locks automatically; 

it is impossible to unlock the door.

Remove the accessories and 

supports from the oven before 

beginning pyrolysis cleaning.

PERFORM A SELF-CLEANING 

CYCLE

Proposed cycles:

  PyroExpress in 59 minutes.

This specific function uses the heat 

built up during a previous cooking cycle 

to quickly and automatically clean the 

inside  of  the  oven:  it  cleans  a  mildly 

dirty oven interior in less than an hour.

The electronic oven temperature 

m o n i t o r   d e t e r m i n e s   w h e t h e r   t h e 

residual heat remaining in the oven 

interior is sufficient to provide a good 

cleaning result. If this is not the case, 

a 90-minute ECO pyrolysis cycle will 

automatically begin.

Pyrolysis 2h00

for more in-depth cleaning of the inside 

of the oven.

IMMEDIATE CLEANING (fig. E)

The programmer must only display the 

time. It should not be flashing.

Turn the function selector to one of the 

self-cleaning functions.

The pyrolysis cycle begins. The time 

starts  to  count  down  as  soon  as  it  is 

set (press the knob).

During pyrolysis, the symbol  is 

displayed in the programmer to indicate 

that the door is locked.

At the end of the pyrolysis cycle,  0:00 

flashes.

When the oven is cool, use a 

damp cloth to remove the white 

ashes. The oven is clean again and 

ready for further cooking operations

.