AEG BER352110M - Инструкция по эксплуатации - Страница 34

Before you replace the lamp:

Step 1

Step 2

Step 3

Turn off the oven. Wait until the

oven is cold.

Disconnect the oven from the

mains.

Put a cloth on the bottom of the cav‐

ity.

Top lamp

Step 1

Turn the glass cover to remove it.

Step 2

Clean the glass cover.

Step 3

Replace the lamp with a suitable 300 °C heat-resistant lamp.

Step 4

Install the glass cover.

12. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

12.1 What to do if...

In any cases not included in this table please

contact with an Authorised Service Centre.

Problem

Check if...

The oven does not heat

up.

The fuse is blown.

The Food Sensor does

not operate.

The plug of the Food

Sensor is fully inserted

into the socket.

Problem

Check if...

The display shows

"12.00".

There was a power cut.

Set the time of day.

The water leaks out of

the cavity embossment.

There is too much water

in the cavity emboss‐

ment.

Unsatisfying cooking per‐

formance of the function:

True Fan Cooking

PLUS .

You filled the cavity em‐

bossment with water.

The lamp does not work. The lamp is burnt out.

12.2 Service data

If you cannot find a solution to the problem yourself, contact your dealer or an Authorised

Service Centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the front

frame of the oven cavity. Do not remove the rating plate from the oven cavity.

We recommend that you write the data here:

Model (MOD.)

.........................................

34

ENGLISH