AEG BER352110M - Инструкция по эксплуатации - Страница 32

Step 1

Turn off the oven and wait until it is

cold.

Step 2

Pull the front of the shelf support

away from the side wall.

Step 3

Pull the rear end of the shelf support

away from the side wall and remove

it.

2

1

Step 4

Install the shelf supports in the oppo‐

site sequence.

The retaining pins on the telescopic

runners must point to the front.

11.4 How to use: Aqua Cleaning

This cleaning procedure uses humidity to

remove remaining fat and food particles from

the oven.

Step 1

Pour water into the cavity embossment:

200 ml.

Step 2

Set the function: 

.

Step 3

Set the temperature to 90 °C.

Step 4

Let the oven work for 30 min.

Step 5

Turn off the oven.

Step 6

Wait until the oven is cold. Dry the cavi‐

ty with a soft cloth.

11.5 How to remove: Grill

WARNING!

There is a risk of burns.

Step 1

Turn off the oven and wait until it is cold

to clean it.

Remove the shelf supports.

Step 2

Grab the grill corners. Pull it forwards

against the spring pressure and out of

two holders. The grill folds down.

Step 3

Clean the oven ceiling with warm water,

a soft cloth and a mild detergent. Let it

dry.

Step 4

Install the grill in the opposite sequence.

Step 5

Install the shelf supports.

32

ENGLISH