AEG BER352110M - Инструкция по эксплуатации - Страница 33

11.6 How to remove and install:

Door

You can remove the door and the internal

glass panels to clean it. The number of glass

panels is different for different models.

WARNING!

The door is heavy.

CAUTION!

Carefully handle the glass,

especially around the edges of

the front panel. The glass can

break.

Step 1

Fully open the door.

A

A

Step 2

Lift and press the clamping levers

(A) on the two door hinges.

Step 3

Close the oven door to the first opening position (approximately 70° angle). Hold the door at both

sides and pull it away from the oven at an upwards angle. Put the door with the outer side down on

a soft cloth on a stable surface.

Step 4

Hold the door trim (B) on the top

edge of the door at the two sides

and push inwards to release the clip

seal.

1

2

B

Step 5

Pull the door trim to the front to re‐

move it.

Step 6

Hold the door glass panels on their

top edge one by one and pull them

up out of the guide.

Step 7

Clean the glass panel with water

and soap. Dry the glass panel care‐

fully. Do not clean the glass panels

in the dishwasher.

Step 8

After cleaning, do the above steps

in the opposite sequence.

Step 9

Install the smaller panel first, then the larger and the door.

Make sure that the glasses are inserted in the correct position otherwise the surface of the door

may overheat.

11.7 How to replace: Lamp

WARNING!

Risk of electric shock.

The lamp can be hot.

ENGLISH

33