Electrolux NPX 6 Sensomatic - Инструкция по эксплуатации - Страница 33

32

CHAPTER

1

English

32

English

CHAPTER

6

EXTERNAL CONTROL

One of Torq’s greatest features is the ability to use external sources to control the 
playback of your song files. In particular, you can use the Torq Control Vinyl or Torq 
Control CDs to provide the familiar tactile sensation of DJing with traditional turntables 
and/or CD decks. Torq also allows you to use external MIDI hardware to control nearly 
any feature within the application.

The Control Vinyl and Control CD system works by using vinyl records and compact 
discs imprinted with special control signals. You’ll play these control signals on your 
turntables and/or CD players and feed that signal into any professional audio interface 
that has four inputs (with phono preamplifiers on each input if you are using turntables) 
such as the M-Audio Conectiv. Torq will listen to those audio signals and will use the 
encoded information to control the playback of the Decks.

Enabling Vinyl/CD Control

1.   Connect the outputs of your first turntable or CD player to inputs 1/2 of your 

audio interface. If the interface has a “Line/Phono” input selector switch, be 
sure to set it to “Phono” if using turntables, or “Line” if using CD players (or 
turntables with built-in preamps).

Turntable

or CD Player

INPUT B

GROUND

INPUT A

OUTPUT B OUTPUT A

Line Phono

Line Phono

2.   Connect the outputs of your second turntable or CD player to inputs 3/4 of 

your audio interface. Again, you’ll need to set its input selector switch as 

described above.

Using Torq with only one turntable or CD player:

The connection diagram on this page assumes you have a traditional 
DJ setup two CD players or turntables.  However, Torq has a 
special “AMPutate Mode” that allows you to control both decks 
using only one turntable or CD player.  This mode is described 

later in this chapter.