Триммеры CROWN CT20051 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
18
English
vents or caustic substances for washing of air
filter 46.
•
Mount the air filter
46
�
•
Place into position cap
45
and enclosure
17
and
screw special bolt
44
in�
Checking the spark plug (see fig. 18)
•
Remove the cap
14
from the spark plug
47
(see
fig. 18).
•
Unscrew the spark plug
47
with the multi-purpose
wrench
26
�
•
Purge the deposits from the electrodes of the spark
plug
47
�
•
Check and adjust (if necessary) the gap between
the side and centre electrodes of the spark plug
47
(it
must be equal to 0,6-0,7 mm)�
•
Mount the spark plug
47
in place and put on the
cap
14
�
Maintenance recommendations
For more complex repair and mainte
-
nance operations on your tool (including
carburetor adjustment etc.), contact the
CROWN service center.
CAUTION: When contacting the CROWN service
center please keep 1/3 volume of the fuel in the
tank 19.
Should the tool collapse, notwithstanding the thorough
check of the tool technical properties by the manufactur
-
er, any repair shall be carried out only by
CROWN
skilled
service specialists�
After-sales service and application service
Our after-sales service responds to your questions
concerning maintenance and repair of your product as
well as spare parts. Information about service centers,
parts diagrams and information about spare parts can
also be found under:
www.crown-tools.com
�
Transportation of the tools
•
Categorically not to drop any mechanical impact on
the packaging during transport.
•
When unloading / loading is not allowed to use any
kind of technology that works on the principle of clamp
-
ing packaging.
Environmental protection
Recycle raw materials instead of dispos
-
ing as waste.
Tool, accessories and packaging should
be sorted for environment-friendly recy-
cling�
The plastic components are labelled for categorized
recycling�
These instructions are printed on recycled paper man-
ufactured without chlorine�
The manufacturer reserves the possibility to introduce changes.
