CROWN CT20051 - Инструкция по эксплуатации - Страница 13

13

English

tool or operate it only if there is enough ventilation 

available�

Before commencing operation

•

The tool shall be operated only by a person properly 

acquainted with the use and maintenance and able to 

demonstrate the ability to operate it properly�

•

Using the tool by children or teenagers is expressly 

prohibited�

•

Don't work in bad weather as thick fog, strong wind, 

heavy  rain  and  snow  represent  additional  hazards 

(because of a possibility of falling on slippery ground, 

etc�)�

•

Prior to switching on the tool move the hands and 

legs away from the cutting line or cutting disc as well 

make sure that the cutting accessory is not in contact 

with any object�

•

Beware  of  injuries  when  using  a  knife  for  shorten 

the cutting line�

•

Inspect  thoroughly  the  plot  to  be  worked  on.  Re

-

move any stones, sticks, wire as well as other foreign 

bodies: they can be thrown away by the cutting line or 

disc and can injure the operator or bystanders�

•

During operation no bystanders or animals are al-

lowed within 15 m� Switch off the tool when any by-

standers or animals approach� 

•

Any use of the tool with the damaged or dismantled 

safety guards is prohibited� Do not operate the tool 

that is not properly assembled or underwent the unap-

proved changes�

•

Direction of the arrow on the cutting disc must al-

ways coincide with the direction of the arrow on the 

protective cover�

•

Check the cutting disc visually on a regular basis for 

deformations,  cracks,  chips,  etc.  Do  not  operate  the 

tool with the damaged cutting disc�

•

Use only recommended cutting accessories. It is ex

-

pressly prohibited to install saw blades or use metal 

wire instead of the recommended cutting line�

The operator or the tool's owner shall be 

liable for the possible accidents or dam

-

age  that  may  be  caused  to  a  third  per

-

sons or their property.

During operation

•

Always use means of individual protection: glasses 

or face shield, ear protectors, dense texture clothes, 

rugged  footwear  with  non-slip  soles.  Never  work  in 

shorts or open footwear�

•

Preserve  stable  position  during  the  work  and  hold 

the tool with both hands� Don't allow the handles 

to become oily and never operate the tool with one 

hand�

•

Move at a foot's pace while working.

•

Working on a slope, move across it as it is safer. 

•

Do not operate the tool above the level of your 

waist�

•

Do not allow the tool to get overheated when in pro-

longed use�

•

It is prohibited to use the tool for cutting of twigs and 

branches on trees�

•

Use the carrying belt, as it gives better control over 

the tool�

•

Any operation close to wire fences or stretched wires 

is prohibited. The wire can be broken due to the contact 

with the cutting tool and injure the operator or be wound 

up onto the cutting tool and can damage the tool�

•

If during operation of the tool the cutting accessory 

has run against any object (for example, a stone or 

stub), has been jammed by a foreign object (for ex-

ample, a twig) or something has been wound on it (for 

example, a rope or wire), switch off the tool immedi-

ately� Remove the defect and carefully inspect parts of 

the tools - it is expressly prohibited to continue with the 

work if the tool's parts are damaged.

If  you  operate  the  cutting  disc,  it  is  ex

-

pressly  prohibited  to  use  the  tool  for 

making  edges  at  garden  paths  and  for 

mowing  the  grass  around  trees,  along 

walls, etc.

After finishing operation

•

It  is  allowed  to  remove  the  tool  from  the  working 

place only after shutting down the engine and full stop-

ping of the cutting accessory� 

•

Certain elements of the tool (for example, parts of 

the engine, etc�) get very hot during operation - don't 

touch them before they cool down�

•

Keep the tool in a place protected from moisture 

and not accessible for children; always remove the cap 

from the spark plug. 

•

If  you  plan  not  to  use  the  tool  for  a  long  period  of 

time, be sure to pour out the fuel from the fuel tank and 

also demount the cutting accessory�

Symbols used in the manual

Following symbols are used in the operation manual, 

please remember their meanings� Correct interpreta-

tion of the symbols will allow correct and safe use of 

the tool�

Symbol

Meaning

CT  ...

XX    XXXXXXX

Serial number sticker:

CT ��� - model;

XX - date of manufacture;

XXXXXXX - serial number�

Read all safety regulations 

and instructions�

Wear:

•

helmet;

•

safety goggles;

•

ear protectors�

Wear a dust mask.

Wear protective gloves�