MERCUSYS MW306R N300 3xFE LAN 1xFE WAN - Инструкция по эксплуатации - Страница 42

33

Chapter 4

4. 3. 5.  Additional Settings

1. Visit 

http://mwlogin.net

, and log in with the password you set for the router.

2. Go to 

Advanced

 > 

Wireless

 > 

Additional Settings

. 

3. 

Configure the advanced settings of your wireless network and click

 Save

.

Note:

If you are not familiar with the setting items on this page, it’s strongly recommended to keep the provided default values; 
otherwise it may result in lower wireless network performance.

•  WMM

 - WMM function can guarantee the packets with high-priority messages being 

transmitted preferentially. 

•  Short GI

 - It is recommended to enable this function, for it will increase the data capacity 

by reducing the guard interval time. 

•  AP Isolation

 - This function isolates all connected wireless stations so that wireless 

stations cannot access each other through WLAN. 

•  Beacon Interval

 - Enter a value between 40-1000 milliseconds for Beacon Interval here. 

Beacon Interval value determines the time interval of the beacons. The beacons are the 
packets sent by the router to synchronize a wireless network. The default value is 100. 

•  RTS Threshold

 - Here you can specify the RTS (Request to Send) Threshold. If the packet 

is larger than the specified RTS Threshold size, the router will send RTS frames to a 
particular receiving station and negotiate the sending of a data frame. The default value is 
2346. 

•  DTIM Interval 

- This value determines the interval of the Delivery Traffic Indication 

Message (DTIM). A DTIM field is a countdown field informing clients of the next window for 
listening to broadcast and multicast messages. When the router has buffered broadcast