MERCUSYS MW306R N300 3xFE LAN 1xFE WAN - Инструкция по эксплуатации - Страница 35

26

Chapter 4

8. 

Click 

LOGIN AND SAVE

.

4. 2. 8.  Static Routing

Static Routing is a form of routing that is configured manually by a network administrator or 
a user by adding entries into a routing table. The manually-configured routing information 
guides the router in forwarding data packets to the specific destination.

I want to:

Visit multiple networks and servers at the same time.
For example, in a small office, my PC can surf the internet through Router A, but I also want 
to visit my company’s network. Now I have a switch and Router B. I connect the devices 
as shown in the following figure so that the physical connection between my PC and my 
company’s server is established. To surf the internet and visit my company’s network at the 
same time, I need to configure the static routing.

Company’s server

PC

Router B

Router A

Switch

LAN: 192.168.1.1

192.168.1.100

LAN: 192.168.1.2

WAN: 172.30.30.100

172.30.30.1

LAN

WAN

POWER RESET/WPS

LAN

WAN

POWER RESET/WPS

How can I do that?

1. 

Change the routers’ LAN IP addresses to two different IP addresses on the same subnet. 
Disable Router B’s DHCP function.

2. 

Visit 

http://mwlogin.net

, and log in with the password you set for Router A. 

3. 

Go to 

Advanced

 > 

Network

 > 

Routing

and locate the Static Routing section

. 

4. 

Click 

Add

 and finish the settings according to the following explanations: