MERCUSYS MW306R N300 3xFE LAN 1xFE WAN - Инструкция по эксплуатации - Страница 111

102

Chapter 7

•  WMM

 - WMM function can guarantee the packets with high-priority messages being 

transmitted preferentially. 

•  Short GI

 - It is recommended to enable this function, for it will increase the data capacity 

by reducing the guard interval time. 

•  AP Isolation

 - This function isolates all connected wireless stations so that wireless 

stations cannot access each other through WLAN. 

•  Beacon Interval

 - Enter a value between 40-1000 milliseconds for Beacon Interval here. 

Beacon Interval value determines the time interval of the beacons. The beacons are the 
packets sent by the router to synchronize a wireless network. The default value is 100. 

•  RTS Threshold

 - Here you can specify the RTS (Request to Send) Threshold. If the packet 

is larger than the specified RTS Threshold size, the router will send RTS frames to a 
particular receiving station and negotiate the sending of a data frame. The default value is 
2346. 

•  DTIM Interval 

- This value determines the interval of the Delivery Traffic Indication 

Message (DTIM). A DTIM field is a countdown field informing clients of the next window for 
listening to broadcast and multicast messages. When the router has buffered broadcast 
or multicast messages for associated clients, it sends the next DTIM with a DTIM Interval 
value. You can specify the value between 1-255 Beacon Intervals. The default value is 1, 
which indicates the DTIM Interval is the same as Beacon Interval.

•  Group Key Update Period

 - Enter a number of seconds (minimum 30) to control the time 

interval for the encryption key automatic renewal. The default value is 0, meaning no key 
renewal.