MERCUSYS MW306R N300 3xFE LAN 1xFE WAN - Инструкция по эксплуатации - Страница 27

18

Chapter 4

•  Service Name

 - The service name should not be configured unless you are sure it is 

necessary for your ISP. In most cases, leaving these fields blank will work.

•  Access Concentrator Name

 - The access concentrator name should not be configured 

unless you are sure it is necessary for your ISP. In most cases, leaving these fields blank 
will work.

•  Detect Online Interval 

- The router will detect Access Concentrator online at every 

interval. The default value is 10. You can input the value between 0 and 120. The value 0 
means no detect.

•  IP Address 

- The default setting is to get an IP address dynamically from your ISP. If your 

ISP does not automatically assign IP addresses to the router, please select

 Use  the 

Following IP Address

 and enter the IP address provided by your ISP in dotted-decimal 

notation.

•  DNS Address 

- The default setting is to get an IP address dynamically from your ISP. If 

your ISP does not automatically assign DNS addresses to the router, please select 

Use 

the Following DNS Addresses

 and enter the IP address in dotted-decimal notation of 

your ISP’s primary DNS server. If a secondary DNS server address is available, enter it as 
well.

•  Connection Mode

 - Select an appropriate connection mode that determines how to 

connect to the internet.

•  Auto

 - In this mode, the internet connection reconnects automatically any it gets 

disconnected.

•  On Demand

 - In this mode, the internet connection will be terminated automatically 

after a specified inactivity period (Max Idle Time) and be re-established when you 
attempt to access the internet again.

•  Time-based 

- In this mode, the internet connection is only established in a specific 

timeframe. If this option is selected, enter the start time and end time. Both are in 
HH:MM format.

•  Manual

 - In this mode, the internet connection is controlled manually by clicking the 

Connect/Disconnect

 button. This mode also supports the 

Max Idle Time

 function 

as 

On Demand

 mode. Enter a maximum time (in minutes), the internet connection 

can be inactive before it is terminated into the Max Idle Time. The default value is 
15 minutes. If you want the internet connection remains active all the time, enter 0 
(zero).

Note:

Sometimes the connection cannot be terminated although you have specified the 

Max Idle Time

 because some applications 

are visiting the internet continually in the background.

L2TP

If your ISP provides L2TP connection, please select 

L2TP

.