Philips FC9256 - Инструкция по эксплуатации - Страница 12

Only use the cleaning brush that comes with the appliance. Other brushes may damage the filter 

cylinder.
The filter cylinder is not waterproof and cannot be cleaned with water, cleaning agents or 

flammable substances.

Note: Cleaning does not restore the original colour of the filter, but does restore its filtration power.

 10 

 To clean the filter cylinder case, use a dry cloth or the cleaning brush supplied. You can also 

clean it with cold tap water and some washing-up liquid (Fig. 43).

 - Do not clean the filter cylinder case with the filter cylinder in it under the tap, as the filter 

cylinder is not waterproof (Fig. 44).

 11 

 Hold the filter cylinder with one hand. Grab the top of the filter cylinder (not the handle) 

with the other hand, insert it into  the case (1) and turn it clockwise (2) to fix it (2) 

(‘click’) (Fig. 45).

Make sure that the filter cylinder case is dry before you reinsert the filter cylinder into it.

 12 

 Put the filter cylinder unit back into the dust bucket (‘click’) (Fig. 46).

Make sure that the dust bucket is dry before you reinsert the filter cylinder unit.

 13 

 Put the dust bucket back into the appliance (Fig. 47).

 14 

 Close the cover firmly (‘click’) (Fig. 48).

Note: If the dust bucket and/or the filter cylinder unit are not installed properly, the appliance does not 

work and the standby light on the cover of the appliance flashes.

Cleaning the motor protection filter 

Clean the permanent motor protection filter ever y two months.

  1 

 Unplug the appliance.

  2 

 Take the motor protection filter out of the appliance and clean the filter by tapping the dust 

out of it over a dustbin (Fig. 49).

If you want to clean the motor protection filter more thoroughly, you can rinse it under a cold tap.

Do not use washing-up liquid, flammable substances or any other cleaning agent to clean the 

motor protection filter.

  3 

 Press the clean filter firmly back into the filter compartment to ensure that it is properly 

placed.

Make sure that the motor protection filter is completely dry before you put it back into the filter 

compartment.

Washable ultra Clean air hEPa 13 filter

HEPA 13 washable filter is able to remove 99.95% of all par ticles down to 0.0003mm in size from 

the outlet air. This not only includes normal house dust, but also harmful microscopic vermin such as 

dust mites Toand their excrements, which are well-known causes of respirator y allergies.

Note: To guarantee optimal dust retention and performance of the vacuum cleaner, always replace the 

HEPA filter with an original Philips filter of the correct type (see chapter ‘Ordering accessories and 

filters’).

Clean the washable HEPA 13 filter ever y 6 months. You can clean the washable HEPA 13 filter max. 

4 times. Replace the filter after it has been cleaned 4 times.

Note: Do not clean the HEPA 13 filter in the washing machine, but follow the procedure below.

  1 

 Unplug the appliance.

English

12