Yamaha DVD-S663 - Инструкция по эксплуатации - Страница 36

32 

En

Setup Menu

Setting the digital output

The [DIGITAL AUDIO] options are: 
[DIGITAL OUTPUT] and [LPCM OUTPUT].

1

In “AUDIO SETUP PAGE”, press 

5

/

a

 to 

highlight [DIGITAL AUDIO], and then 
press 

3

.

2

Press 

5

/

a

 to highlight an option.

3

Press 

3

.

DIGITAL OUTPUT

Set the digital output according to your 
optional audio component connections.

OFF

Select this to turn off the digital output.

ALL

Select this if you have connected the digital 
audio output jack to a multi-channel decoder/
receiver.

PCM ONLY

Select this only if your receiver is not capable 
of decoding multi-channel audio signals.

y

• Even if “ALL” is selected, this unit converts 

MPEG audio into 2 channel PCM and then 
outputs to the connected component.

• When “PCM ONLY“ is selected, DTS digital 

signal is muted.

LPCM OUTPUT

Select this if you have connected this unit to a 
PCM-compatible receiver via a digital jack, 
such as the coaxial jack. In this case, you may 
need to adjust [LPCM OUTPUT].
Discs are recorded at a certain sampling rate. 
The higher the sampling rate, the better the 
sound quality.

48KHz

Select this to play back discs recorded at the 
sampling rate of 48 kHz. All 96 kHz PCM data 
streams (if available) are converted to the 
sampling rate of 48 kHz.

96KHz

Select this to play back discs recorded at the 
sampling rate of 96 kHz. If the 96 kHz disc is 
copy protected, the digital output is 
automatically converted to the sampling rate of 
48 kHz. 48 kHz PCM data streams are output at 
48 kHz.

4

Press 

5

/

a

 to select a setting, and then 

press 

ENTER

.

Turning the HDMI audio on/off

When you connect this unit to an HDMI 
compatible component via the HDMI jack, 
select to turn on or off the HDMI audio output.

•

Select [HDMI AUDIO] in “AUDIO 
SETUP PAGE”.

ON

Select this to turn on the HDMI audio output.

OFF

Select this to turn off the HDMI audio output.

• If you are not using the HDMI audio output, set 

this to [OFF].

• If the monitor/receiver connected to this unit 

using HDMI does not support HDMI audio signal 
input, set this to [OFF].

• When audio signals are being output by HDMI-

compatible components, digital signals output at 
the coaxial jack of this unit are muted.

• When [DIGITAL OUTPUT] is set to [OFF] on 

this unit, HDMI audio signal is not output even if 
[HDMI AUDIO] is set to [ON] and an HDMI 
connection is established between the monitor 
and receiver.

• When [DIGITAL OUTPUT] is set to [ALL] on 

this unit, PCM signals are still output if the 
monitor and receiver only support the PCM 
format. However, the HDMI audio signal is 
muted when audio format plays back the DTS 
source.

Notes