Yamaha DVD-S663 - Инструкция по эксплуатации - Страница 27

23 

En

Playback Operation

Eng

lish

■

To select a subtitle language

During playback, press 

SUBTITLE

 to 

switch or turn on/off the subtitle language 
recorded on the contents.

y

• For information about external subtitle files, see 

“Selecting DivX

®

 external subtitle group (except 

Korea model)” on page 38.

• For external subtitle files, the following subtitle 

format filename extensions are supported (note 
that these files are not shown within the disc 
menu): .srt, .sub, .ssa, .smi

• The filename of the movie file has to be repeated 

at the beginning of the filename for the external 
subtitle file.

• For Korean model, Korean and English external 

subtitle files are available.

• Some external subtitle files may be displayed 

incorrectly or not at all.

• Some discs cannot be played depending on disc 

characteristics or recording conditions.

• The number of external subtitle files that can be 

switched for the same movie file is limited to a 
maximum of ten.

You can play back MP3, WMA, WMV, JPEG, 
and DivX

®

 files saved on your supported USB 

device.

Supported USB devices

This unit supports USB mass storage class 
devices using FAT16 or FAT32 format. The 
supported devices are flash memories, card 
readers, and portable audio players.

• Some devices may not work properly.
• If “Device not supported” appears on the TV 

screen when you connect the USB device, follow 
the procedure below.
– Set this unit to the standby mode, and then turn 

it on again.

– Disconnect the device when this unit is in the 

standby mode, then connect it again and turn 
on this unit.

– Connect the AC adapter if the adapter is 

supplied with the device.

If “Device not supported” appears even after you 
perform this procedure, the device is not usable 
with this unit.

• If “USB current protection active. Device not 

supported” appears on the TV screen, the device 
is not usable with this unit because the power 
consumption of the device is too high.

• This unit cannot read more than two card reader 

slots at once, though it can recognize up to six 
slots. The first slot has priority.

• Do not connect devices other than USB mass 

storage class devices: USB chargers, USB hubs, 
PCs, etc.

• This unit is not compatible with HDDs.

Playing data files

1

Connect your USB device to the USB port 
of this unit (see “USB port” on page 12).

➜

“Press USB key to switch device” 
appears on the TV screen.

2

Press 

USB

.

•

The reading time may exceed 30 seconds 
due to the number of files/folders.

➜

The file menu appears on the TV screen.

3

Follow the procedure in “Playing data discs 
(MP3/WMA/WMV/JPEG/DivX

®

)” on 

page 21.

Notes

Using a USB device

Notes