Проигрыватели Sharp DV-NC70RU - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
GB
96
■
DVD
Problem
•
The Product is switched on but does
not operate.
•
The playback image does not
appear.
•
No sound is produced.
•
The sound is not Dolby Digital (5ch
or 5.1ch).
•
The image and sound are garbled.
•
The sound is not stable during
playback.
Suggested Solution
•
Have you loaded a disc?
•
Is the disc unplayable? (See pages 3 – 5.)
•
Is there dew in the Product? (See page 2.)
•
Are the video and audio cables connected correctly? (See pages
14 – 17.)
•
Is the disc scratched? (See page 5.)
•
Is the disc dirty? (See page 5.)
•
Is the disc loaded upside down?
•
Is the input selector on the TV set to “VIDEO” or “AV”?
•
Is the audio equipment switched on and are all the components
connected properly? (Refer to the operation manuals for your
audio equipment.)
•
Is the disc you are playing recorded in Dolby Digital (5ch or
5.1ch)?
•
Have you set the “
DIGITAL” in “AUDIO SETUP” to
“BITSTREAM”? (See page 45.)
•
Is the disc scratched? (See page 5.)
•
Are vibrations from the speakers affecting the Product?
•
Set the “COMPRESSION” in “AUDIO SETUP” to “OFF” (See page
44.)
This Product is equipped with a microprocessor. Its performance could be adversely affected by external electrical
noise or interference. If this should happen, unplug the Product and plug it in again after a few minutes.
Troubleshooting
Suggested Solution
•
Make sure there is no other cassette inside.
•
Make sure the cassette is correctly positioned and then reinsert.
•
Make sure the Product is not in the timer setting or clock setting
mode.
•
The channel may have been set to be skipped.
Cancel the skip setting for that channel.
•
When a tape is recorded in the LP mode in the MESECAM
system, the picture is discoloured during video search, still and
similar modes. However, this does not indicate a malfunction.
•
If a tape is recorded in the LP mode (regardless of whether it is a
MESECAM or PAL tape), the picture is skewed during video
search. However, this does not indicate a malfunction.
•
Is NICAM set to OFF on the OSD mode?
Problem
•
Cassette cannot be loaded.
•
Picture does not change even
though
CH
'
/
"
are pressed.
•
Selected programme position does
not appear.
•
No colour appears during video
search and the like.
•
Picture is skewed.
•
NICAM sound cannot be output.
