Материнские платы GIGABYTE GA EX58 UD3R SLI rev 1 0 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
- 39 -
BIOS Setup
CPU Thermal Monitor
(Note)
Enables or disables Intel CPU Thermal Monitor function, a CPU overheating protection function.
When enabled, the CPU core frequency and voltage will be reduced when the CPU is overheated.
(Default: Enabled)
CPU EIST Function
(Note)
Enables or disables Enhanced Intel SpeedStep Technology (EIST). Depending on CPU loading,
Intel EIST technology can dynamically and effectively lower the CPU voltage and core frequency
to decrease average power consumption and heat production. (Default: Enabled)
Virtualization Technology
(Note)
Enables or disables Intel Virtualization Technology. Virtualization enhanced by Intel Virtualization
Technology will allow a platform to run multiple operating systems and applications in independent
partitions. With virtualization, one computer system can function as multiple virtual systems.
(Default: Enabled)
Bi-Directional PROCHOT
(Note)
Enabled
When the CPU or chipset detects that an overheating is occurring, PROCHOT
signals will be emitted to lower CPU performance to decrease heat production.
(Default)
Disabled
Only allows the CPU to detect whether an overheating is occurring to emit
PROCHOT signals.
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
UnCore & QPI Features
: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
QPI Link Speed
[Auto]
QPI Link Speed
4.8GHz
Uncore Frequency
[Auto]
Uncore Frequency
2133MHz
Isochronous Support
[Enabled]
Item Help
Menu Level
******* UnCore & QPI Features *******
(Note) This item appears only if you install a CPU that supports this feature.
QPI Link Speed
Allows you to set the QPI Link speed. Options are: Auto (default), x36, x44, x48, Slow Mode.
UnCore Frequency
Allows you to set the UnCore frequency. Options are: Auto (default), x12~x48.
Isochronous Support
Determines whether to enable specific streams between the IOH and ICH. (Default: Enabled)
