Zelmer 13Z016 - Инструкция по эксплуатации - Страница 111

CAUTION! If the water in the water tank (1) runs out of water during the coffee brewing process, the espresso 
machine will stop working. The indicator 

 will flash on the display panel and you will hear a repeating sound 

signal informing you about the necessity to fill in water. Open the water tank cover (1) and pour in the water. 
After replenishing water, the sound signal will stop and the espresso machine will automatically finish the coffee 
brewing process. 

CAUTION! It is possible to stop the coffee brewing process at any given moment. It is enough to push the Power 
on/off button 

 (A)

.

12. Programming the memory function (P1 and P2) 

The espresso machine has two memory modes letting you program your custom settings including temperature, espresso 
instant bags mode or ground coffee mode, selecting 1 or 2 cups and a given amount of coffee. 
The programming process includes the following steps:

12.1. Unplug the espresso machine from the power supply. 
12.2. Fill the water tank 

(1)

 according to 

paragraph 4

. 

12.3. Plug the espresso machine by putting the cord into the socket. The machine will turn on. The display panel and 

the power on/off button 

(A)

 will flash. The display panel will indicate power is on 

. 

12.4. Push the power on/off button 

(A)

. You will hear a sound signal. 

12.5. The 

 indicator on the display panel will begin to whirl, signalizing that the espresso machine is heating up. 

12.6. When the 

 indicator stops whirling, you will hear a sound signal informing you that the machine is ready for 

use (has reached the right temperature). 

12.7. Choose espresso instant bags mode or ground coffee mode by pressing single/double cup select button 

 2 seconds. After each push you will hear a sound signal. 

(B)

 for

12.8. Pour ground coffee by means of a measuring cup 

(13)

 or insert espresso instant bags into the filter handle container 

(6)

. 

12.9. Remove the excess of coffee from the edge of the filter and compress the coffee by the permanent coffee 

compressor 

(5)

 or the whip of the measuring cup 

(13) (Fig. 4)

. 

12.10. Attach filter handle 

(6)

 to the brew head 

(4)

, by turning it with a firm motion to the right 

(Fig. 3)

. 

12.11. Place a cup or cups on the drip tray grid 

(7)

, directly under the brew head 

(4)

. 

12.12. Select program 

 or 

 by pressing the coffee amount select button 

(C)

. After each push you will hear a sound signal. 

12.13. Press and hold the single/double cup select button 

(B)

 and temperature select button   

(D)

 for 

2 seconds. 

 or 

 indicator will flash on the display panel. 

12.14. Select temperature setting (see 

paragraph 9

), choose espresso instant bags mode or ground coffee mode 

(see 

paragraph 10

) and the single cup (

 indicator) or double cup (

 indicator) select button 

(B)

. 

12.15. Push the brew coffee button 

(F)

 and espresso will come out of the machine. The display panel will 

indicate 

 (after choosing a double cup) or 

 (after choosing a single cup). After getting the coffee 

release the brew coffee button 

(F)

. You will hear two sound signals and the display panel will indicate 

 or 

. 

12.16. After saving the settings 

 or 

 indicator will stop flashing and you will hear a sound signal. 

12.17. Remove the filter handle by turning it to the left 

(Fig. 5)

 and throw out the used bag or coffee grounds 

(Fig. 6)

. 

Clean the filter with water 

(Fig. 7)

. 

CAUTION! While holding the brew coffee button 

(F) remember that after when a single cup is filled to the 

maximum (ca. 250 ml), the machine will automatically stop the brewing process (you will hear two sound signals) 
and save the settings. 

CAUTION! During programming pay attention if the 

 or 

 indicator are flashing. If they stop flashing for any 

reason the 

 or 

 stops flashing, start programming mode again by pressing and holding both the 

single/double cup select button 

 (B) and temperature select button   (D) for 2 seconds and follow the 

steps up to paragraph 11.16. 

CAUTION! In order to delete the program 

 or 

 settings press and hold both the temperature select button   

(D) and the steam select button 

 (E). 

CAUTION! A complete switch-off of the coffee maker or leaving the coffee maker in an automatic switch-off mode 
will cause a return to the manufacturer’s capacity settings for the 

 or 

 programme (i.e. approx. 30 ml), 

provided that the previously programmed capacity exceeded 90 ml. 

  111