Zelmer 13Z016 - Инструкция по эксплуатации - Страница 109

6.1.10. Choose double cup of coffee pressing the single/double cup select button 

(B)

. After each push you will 

hear a sound signal. If you have chosen to select a double cup, the display panel will indicate 

. 

In case of a single cup the display panel will indicate 

. 

6.1.11. Press the brew coffee button 

(F)

. You will hear a sound signal. 

6.1.12. Hot water will come out of the machine and the display panel will indicate 

 (after choosing a double 

cup) or 

 (after choosing a single cup). 

6.1.13. Brewing will be automatically stopped after a given amount of water. You will hear two sound signals, and the 

display panel will indicate 

 in case of choosing a double cup or 

 in case of a single cup. 

6.1.14. Repeat step 

6.1.11

 three times. 

6.2. Rinsing the machine for the steam mode 

6.2.1. Check if there is water in the water tank 

(1)

. If there is no water, fill the water tank 

(1)

 according 

to 

paragraph 4

. 

6.2.2. Press the steam button 

(E)

. You will hear a sound signal. The display panel will lit the 

 indicator, 

signalizing that the espresso machine is now in steam mode. 

6.2.3. The 

 indicator on the display panel will begin to whirl, signalizing that the espresso machine is heating up. 

6.2.4. When the 

 indicator stops whirling, you will hear a sound signal informing you that the machine is ready for 

use (has reached the right temperature). 

6.2.5. Put a container under the steam nozzle 

(10)

 and turn the steam control 

(12)

 to position 

, i.e. turn it 

counterclockwise, so the sign 

 will cover the casing of the espresso machine. Let the machine work 

with the mode on for ca. 1 minute. Then turn the steam control 

(12)

 to 

position,

i.e. turn it clockwise, so 

the sign 

 will cover the marker on the casing of the espresso machine. Empty the container. 

6.2.6. Repeat step 

6.2.5

 three times. 

CAUTION! Push the power on/off button 

 (A), you will hear a sound signal. The indicator 

 will go off on 

the display panel, signalizing that the espresso machine has returned to the coffee brewing mode. 

7. Adjusting water hardness 

The espresso machine has been programmed with three levels of water hardness: low (

 indicator), medium (

indicator) and high (

 indicator). The default level is set to 

 medium. If you want to change water hardness, press and 

hold the coffee amount select button 

(C)

 for 2 seconds. You will hear a sound signal and the water hardness indicator 

on the display panel will start to flash. Each time you push the coffee amount select button 

(C)

 which action is 

accompanied by a sound signal water hardness level changes in the following order: medium 

Æ

 high 

Æ

 low 

Æ

 medium 

Æ

 high 

, etc. If you choose to select e.g. high 

 level, do not push the button again. Wait 2 seconds 

and the setting will be automatically saved and you will hear a sound signal. 

To establish the current water hardness level, the user should to carry out a test with a test apparatus supplied together 
with the espresso machine. Put the test apparatus in the water for one second. After removing it from the water shake the 
excess of water off and see the results after waiting ca. 15 seconds. A dry test apparatus should have a green square 
space. After getting it wet, the space should change its color. Compare the color of the square space on the wet test 
apparatus with the color legend on the packaging. A green color means that the water is soft, a brown color means the 
water is hard (medium level) and an orange color means that the water is extremely hard (high level). On the basis 
of your results adjust water hardness in the espresso machine according to the above instructions. 

8. Selecting a programmed amount of coffee 

The espresso machine has 4 preprogrammed amounts of coffee: 30 ml, 40 ml, 50 ml and 60 ml. The amount of coffee 

may be selected by pressing the coffee amount select button 

(C)

. After each push you will hear a sound signal. The 

amount of coffee changes in the following order: 30ml 

Æ

 40ml 

Æ

 50ml

Æ

 60ml 

Æ

 P1

Æ

 P2 

Æ

 30ml, etc. 

CAUTION! 

 and 

 (Program 1 and 2) are special memory functions, which enable you to save your custom 

settings. The method of setting the memory programs (P1 and P2) is shown in paragraph 12. 
 
 

  109