Кофемашина Zelmer 13Z016 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
4. Filling the water tank
CAUTION! Pour the water into the tank (1) only when the cord is unplugged from the socket. The valve at the
bottom part of the tank prevents the water from leakage.
•
Remove the water tank
(1)
by pulling it upward
(Fig. 1)
.
•
Open the cover of the water tank
(1)
and fill it up with fresh, cool water
(Fig. 2)
.
Do not exceed the maximum
(MAX) level.
•
Place the tank
(1)
in its place and press it.
•
Close the cover of the tank
(1)
.
•
The tank may be filled without removing it from the machine, e.g. by pouring the water
out of a pitcher.
Fig. 1
Fig. 2
CAUTION! Do not use the espresso machine, when the tank (1) is empty. Before brewing coffee it is vital to check
whether there is any water in the tank (1). Do not fill the tank (1) with hot water. Due to hygienic reasons do not
leave any water in the tank for longer periods.
CAUTION! Remember to avoid low levels of water level in the tank (1). In such a case the machine will stop
working, give out a sound signal, which will end only if the tank is filled (1), furthermore the no-water indicator
will flash on the display panel.
5. Warming up the cups
Using a cup warmed up to a certain temperature before brewing coffee increases the taste of the coffee itself and creates
a thick froth on its surface.
The machines gives you two ways of warming up a cup. The first one is to warm it by means of hot water coming out of
the steam/hot water nozzle
(10)
acting accordingly to
paragraph 14
.
The second way is to place the cups before the coffee brewing process on the cup-warming plate
(2)
situated at the top of
the espresso machine.
6. Before first use (rinsing the machine)
Before using the machine for the first time or if it has not been used for
a longer period, it is necessary to rinse it.
6.1. Rinsing the machine for the espresso function
6.1.1. Unplug the machine.
6.1.2. Fill the water tank
(1)
according to
paragraph 4
.
6.1.3. Attach the empty filter handle
(6)
to the brew head
(4)
, by
turning it with a firm motion to the right
(Fig. 3)
.
6.1.4. Place a container on the drip tray grid
(7)
, directly under the
brew head
(4)
.
Fig. 3
6.1.5. Plug the cord into the socket. The espresso machine will turn on, the display panel and the power on/off button
(A)
will flash, and the power on/off indicator
on the display panel will be lit.
6.1.6. Push the power on/off button
(A)
, you will hear a sound signal.
6.1.7. The
indicator on the display panel will begin to whirl, signalizing that the espresso machine is heating up.
6.1.8. When the
indicator stops whirling, you will hear a sound signal informing you that the machine is ready for
use (has reached the right temperature).
6.1.9. Choose the maximum amount of coffee (
60 ml
in our case) by pressing the coffee amount select button
(C)
. After each push you will hear a sound signal and the display panel will show the following numbers in turn:
,
,
,
,
,
,
, etc. Push the button as many times as it is necessary the indicator to show
.
108
