Siemens TE515209RW - Инструкция по эксплуатации - Страница 18

14

en

The machine automatically releases water 

into the container and vacuums it up again 

via the milk tube to rinse the milk system� 

The rinse procedure stops automatically 

after about 1 minute�

●

Empty the container and clean the milk 

tube (6c)�

In addition to this, clean the milk system 

thoroughly at regular intervals (by hand or 

in the dishwasher)�

Dismantling the milk system for cleaning:

●

Pull the milk frother (6) forward out of the 

appliance� 

●

Dismantle the milk frother into its indi-

vidual parts (6a to 6d) (see 

figure C

 at 

the start of the operating instructions)� 

●

Clean the individual parts with a detergent 

solution and a soft brush� If necessary, 

soak in a warm detergent solution� 

●

Rinse all parts with clear water and dry 

them�

●

Reassemble all the parts and replace fully 

in the appliance� 

A

Risk of scalding!

Use this appliance only after the milk frother 

(6) has been fully assembled and installed�

Cleaning the brewing unit

Clean the brewing unit regularly!

To pre-clean the brewing unit automatically:

●

Select 

k

 by turning the rotary knob (15)�

●

Place an empty glass under outlet (6a)�

●

Press the 

start

 button (10)�

The appliance rinses� 

In addition to the automatic cleaning 

programme, the brewing unit (5a) should 

be removed regularly for cleaning� (See 

figure E

 at the start of the operating 

instructions�) 

●

Switch the appliance off at the power on/

off switch 

O / I 

(9)� No buttons are lit�

●

Open the door (5b) to the brewing unit�

●

Slide the red lock (5e) on the brewing unit 

(5a) completely to the left�

●

Press the eject lever (5d) down fully� The 

brewing unit is released�

●

Grasp the brewing unit (5a) by the 

recessed grips and remove carefully�