Siemens TE515209RW - Инструкция по эксплуатации - Страница 14

10

en

Water hardness

: The water hardness 

setting can be adjusted on this appliance� 

It is important to set the water hardness 

 correctly, so that the appliance indicates 

accurately when the descaling programme 

should be run� The factory setting for the 

water hardness is 4� 

You can check the water hardness using 

the enclosed test strip or by asking your 

local water supplier� If a water softener is 

installed in the house, please set the water 

hardness to level 3�

Dip the test strip briefly in water, gently 

shake off any drips, and check the result 

after one minute�

Level

Water hardness

German (°dH)

French (°fH)

1

2

3

4

1-7

8-14

15-21

22-30

1-13

14-25

26-38

39-54

Drink counter

: This displays how many 

drinks have been dispensed since the appli-

ance was first put into operation.

Adjusting the 

grinding unit

The rotary selector (3) adjusts the grind 

settings from coarse to fine.

A

Warning!

Adjust the grinding unit only while it is 

 running! Otherwise the appliance may 

be damaged� Do not reach into the 

grinding unit�

●

While the grinding unit is running, adjust 

the rotary selector (3) from fine (

a:

 Turn 

anticlockwise) to coarse (

b:

 Turn clock-

wise) as required� 

Note: 

The new setting will not become 

apparent until after the second cup of 

coffee�

Note:

 If the message 

Adjust coarseness!

appears in the display, the grind setting 

for the coffee beans is too fine. Adjust the 

grinding unit to a coarser setting�

Tip: 

For dark roast coffee beans, choose a 

finer grind, for lighter beans a coarser grind.