Bosch 0.601.626.000 - Инструкция по эксплуатации - Страница 15

 English | 

15

Bosch Power Tools

1 609 92A 2NP | (19.8.16)

If damaged, have the power tool repaired before use. 

Many accidents are caused by poorly maintained power 
tools.



Keep cutting tools sharp and clean. 

Properly maintained 

cutting tools with sharp cutting edges are less likely to bind 
and are easier to control.



Use the power tool, accessories and tool bits etc. in ac-
cordance with these instructions, taking into account 
the working conditions and the work to be performed. 

Use of the power tool for operations different from those 
intended could result in a hazardous situation.

Service



Have your power tool serviced by a qualified repair per-
son using only identical replacement parts. 

This will en-

sure that the safety of the power tool is maintained.

Safety Warnings for Routers



Hold power tool by insulated gripping surfaces, be-
cause the cutter may contact its own cord. 

Cutting a 

“live” wire may make exposed metal parts of the power tool 
“live” and shock the operator.



Use clamps or another practical way to secure and sup-
port the workpiece to a stable platform. 

Holding the 

work by your hand or against the body leaves it unstable 
and may lead to loss of control.



The allowable speed of the router bit must be at least as 
high as the maximum speed listed on the power tool. 

Accessories that rotate faster than permitted can be de-
stroyed.



Router bits or other accessories must fit exactly in the 
tool holder (collet) of your machine. 

Routing bits that do 

not fit precisely in the tool holder of the machine rotate ir-
regularly, vibrate heavily and can lead to loss of control.



Apply the machine to the workpiece only when 
switched on. 

Otherwise there is danger of kickback when 

the cutting tool jams in the workpiece.



Keep your hands away from the cutting area and the 
cutting disc. Hold the auxiliary handle with your second 
hand. 

When both hands hold the machine, they cannot be 

injured by the cutting disc.



Never cut over metal objects, nails or screws. 

The rout-

er bit can become damaged and lead to increased vibra-
tions.



Use suitable detectors to determine if utility lines are 
hidden in the work area or call the local utility company 
for assistance. 

Contact with electric lines can lead to fire 

and electric shock. Damaging a gas line can lead to explo-
sion. Penetrating a water line causes property damage or 
may cause an electric shock.



Do not use blunt or damaged router bits. 

Blunt or dam-

aged router bits cause increased friction, can become 
jammed and lead to imbalance.



When working with the machine, always hold it firmly 
with both hands and provide for a secure stance. 

The 

power tool is guided more secure with both hands.



Always wait until the machine has come to a complete 
stop before placing it down. 

The tool insert can jam and 

lead to loss of control over the power tool.

Products sold in GB only

: Your product is fitted with a 

BS 1363/A approved electric plug with internal fuse (ASTA 
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be 
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should 
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible 
shock hazard and should never be inserted into a mains sock-
et elsewhere.

Products sold in AUS and NZ only

: Use a residual current de-

vice (RCD) with a rated residual current of 30 mA or less.

Product Description and Specifica-
tions

Read all safety warnings and all instruc-
tions. 

Failure to follow the warnings and in-

structions may result in electric shock, fire 
and/or serious injury.

While reading the operating instructions, unfold the graphics 
page for the machine and leave it open.

Intended Use

The machine is intended for routing grooves, edges, profiles 
and elongated holes as well as for copy routing in wood, plas-
tic and light building materials, while resting firmly on the 
workpiece.
With reduced speed and with appropriate routing bits, non-
ferrous alloys can also be machined.

The light of this power tool (GOF 1250 LCE) is designed to il-
luminate the immediate work area of the power tool and is not 
suitable for household room illumination.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.

1

Right handle (insulated gripping surface)

2

Lock-on button for On/Off switch

3

Light ring  (GOF 1250 LCE)

4

Tightening nut with collet

5

Router bit *

6

Spindle lock lever

7

Screw for parallel guide rods (2x)

8

Chip shield

9

Step buffer

10

Adjusting screws for step buffer

11

Guide plate

12

Seat for parallel guide rods

13

Base plate

14

Depth stop

15

Screw for depth stop fixing

OBJ_BUCH-2018-005.book  Page 15  Friday, August 19, 2016  9:44 AM