Электропилы Bosch ISIO 3 060083310 G - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
English |
15
Bosch Power Tools
F 016 L70 919 | (31.7.13)
Sprayer
We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with the fol-
lowing standards or standardization documents: EN 60745
(battery powered product) and EN 60335 (battery charger)
according to the provisions of the directives 2006/95/EC,
2004/108/EC, 2006/42/EC, 2011/65/EU.
Technical file (2006/42/EC, 2000/14/EC) at:
Bosch Lawn and Garden Ltd., PT-LG/ENS4,
Stowmarket, Suffolk IP14 1EY, England
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
17.07.2013
Mounting and Operation
Cutting Hedges
Before cutting check the hedge for foreign objects e. g. wire
fences.
Application
To maintain control hold the machine properly by the handle.
Holding the machine incorrectly could result in injury.
After use replace the blade transport guard.
Telescopic handle
The telescopic handle can be used with the grass and shrub
shear attachment. Before using the handle with the shrub
shear attachment, the wheels should be detached.
Anti Blocking
If the blade stalls on a tough material, the load of the motor in-
creases. The intelligent micro-electronics senses this over-
load condition and repeatedly reverses the motor, in order to
prevent stalling and to cut the material through.
This audible reversing cut action continues for up to 3 s.
After cutting through, the garden product continues in its nor-
mal mode, or in case the overload condition continues the
blades automatically stop in the open position (e. g. in case a
piece of metal fence accidentally blocks the garden product).
Battery Charge-control Indication
The battery charge-control indicator indicates the charging
progress. During the charging process, the indicator
flashes
green
. When the battery charge-control indicator
lights up
green continuously
, the battery is fully charged.
The battery charge-control indicator indicates the charge
condition of the battery for a few seconds when the On/Off
switch is pressed through halfway of fully.
Troubleshooting
Henk Becker
Executive Vice President
Engineering
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Action
Figure
Delivery Scope
1
Battery Charging
2
Attaching Tool/Detaching Tool
3
Switching On and Off
4
Fitting Telescopic handle
5
Removing Telescopic handle
6
Adjusting Handle Length
7
Setting for Edge Cutting/Setting Handle Angle 8 – 9
Removing Wheels
10
Working Instruction Telescopic handle
11 – 12
Sprayer Application
13
Maintenance
14
Accessories
15
LED
Capacity
Continuous lighting, green
35 – 100 %
Flashing light, green
15 – 35 %
Flashing light, red
5 – 15 %
Continuous lighting, red
0 – 5 %
Problem
Possible Cause
Corrective Action
Cutting time per battery charge too low
Battery close to end of lifecycle
Contact Service Agent
Continuous lighting of the battery charge indicator
No charging procedure possible
Battery pack defective
Contact Service Agent
OBJ_BUCH-1714-002.book Page 15 Wednesday, July 31, 2013 11:47 AM
