Kuppersberg KSO 610 X - Инструкция по эксплуатации - Страница 65

65

ENGLISH

TECHNICAL PASSPORT

Built-in Oven

Â

Fix the appliance with the screws 

provided along with it.

Â

Screw the appliance into the 

holes, which are shown in figure 6. 

Â

Make sure that the oven is fixed. 

Otherwise, there is a risk of tilting dur-
ing use.

Last Checks

Â

Turn on the electricity after per-

forming the installation.

Â

Read the user manual for using 

the appliance.

Removing The Appliance

Â

Turn off the electricity.

Â

Remove the fixing screws.

Â

Lift the appliance together with 

at least two people by pulling it out.

Future Carrying Procedures

While carrying the appliance in the 

future;

Â

Retain the original box of the ap-

pliance. In case there is no original box, 
tape and wrap it with a bubble packag-
ing or a thick cardboard tightly.

Â

If there is an accessory in it, 

place  a  cardboard  in  the  size  of  the

oven door so the oven door is not dam-
aged. Tape the door to prevent it from 
opening.

 WARNING. 

Do not lift the oven by 

holding its handle or door.

 WARNING. 

Do not place an item 

on the product, carry it uprightly.

sions  mentioned  in  figure  2  for  neces

-

sary ventilation.

Installing Into A Tall Cabinet 

(Figure 3)

Â

The cabinet should be in compli-

ance with the dimensions mentioned in 

figure 3.

Â

You need to unload the rear com-

partment of the cabinet in the dimen-

sions mentioned in the figure for neces

-

sary ventilation.

Â

Moreover, if there is a back panel 

in the tall cabinet, it should also be re-

moved.

Ventilation (Figure 4)

In  order  for  you  to  get  better  effi

-

ciency from your oven, there should be 

adequate cold air intake. Leave suitable 

spaces according to the dimensions 

mentioned in Figure 4.

Installing On The Corner 

(Figure 5)

Â

The installation should be in 

compliance  with  the  specified  dimen

-

sions to perform the installation men-

tioned in Figure 5 and to be able to 

open the appliance door.

Fixing The Appliance (Figure 6)

Â

Center the appliance and push it 

completely into the furniture.

Â

Power cable should not be bent 

under the oven and between the oven 

and the furniture.

Â

Open the appliance door.