Bertazzoni F6011MODVTC - Инструкция по эксплуатации - Страница 54

26

EN

BASIC MAINTENANCE

REMOVING THE SIDE GUIDES

•  Identify the two hooks at the bottom of the guide 

assembly and pull them gently downwards.

•  Pull  the  guide  assembly  away  from  the  side 

of  the  oven  and  remove  by  pulling  the  upper 
hooks of the assembly upwards from the side 
of the oven.

•  Remove  the  side  guide  assembly  from  the 

oven.

REPLACING THE OVEN LIGHT

Warning! 
Isolate  the  oven's  power  supply  before 
changing  the  light  bulb.  DO  NOT  touch  the 
bulb with your bare hands.

Oven side light (where fi tted)

Bulb type: G9 halogen, 220 V, 40 W
•  Ensure that the oven is off  and cool. 
•  If necessary, remove the side guides from the 

oven.

•  Slide the tip of a fl at-head screwdriver between 

the  glass  cover  and  the  bulb  housing,  taking 
care not to damage the seal. 

•  Gently turn the tip of the screwdriver to loosen 

the glass while keeping it in position with your 
fi ngers to prevent it falling and breaking.

•  Remove the glass and take out the old halogen 

bulb.

•  Insert  a  new  halogen  bulb  in  the  holder.  DO 

NOT touch the bulb with your bare hands.

•  Press  the  glass  cover  back  on,  repositioning 

the gasket. 

•  Reposition the oven rack.
•  Refi t the side guide.
•  Reinstate the power supply.

REPLACING RESERVOIR SEAL

Each  time  the  reservoir  is  removed,  check  that 
the  seals  are  intact  and  correctly  positioned. 
Replace  them  with  those  supplied  if  they  should 
be damaged.

/ Maintenance