Makita GB 801 - Инструкция по эксплуатации - Страница 3

3

■

WEAR APPROPRIATE CLOTHING. Do not wear loose 
clothing, neckties, or jewelry that can get caught in the 
tool’s moving parts and cause personal injury, Non-
solid footwear is recommended when working 
outdoors. Wear protective hair covering to contain long 
hair.

■

ALWAYS WEAR SAFETY GLASSES WITH SIDE 
SHIELDS. Everyday eyeglasses are NOT safety 
glasses.

■

PROTECT YOUR LUNGS. Wear a face or dust mask if 
the cutting operation is dusty.

■

PROTECT YOUR HEARING. Wear hearing protection 
during extended periods of operation.

■

DON’T ABUSE CORD. Never carry tool by the cord or 
yank it to disconnect from receptacle. Keep cord away 
from heat, oil, and sharp edges.

■

DO NOT OVERREACH. Keep proper footing and 
balance at all times.

■

MAINTAIN TOOLS WITH CARE. Keep tools sharp and 
clean for best and safest performance. Follow 
instructions for lubricating and changing accessories.

■

NEVER LEAVE TOOL RUNNING UNATTENDED. 
TURN POWER OFF. Disconnect all tools when not in 
use, before servicing, or when changing attachments, 
wheels, etc.

■

AVOID ACCIDENTAL STARTING.

■

USE RECOMMENDED ACCESSORIES. The use of 
improper accessories may cause risk of injury.

■

DO NOT use wheels with incorrect size bore. NEVER 
use wheel washers or wheel that are defective or 
incorrect and NEVER touch grinding wheel or other 
moving parts.

■

NEVER STAND ON TOOL. Serious injury could occur 
if the tool is tipped or if the wheel is unintentionally 
contacted.

■

DIRECTION OF FEED. Be aware of wheel rotation 
direction; never grind without the work rest being 
properly set. NEVER grind more than one workpiece at 
a time.

 WARNING

Wheel coasts after turn off.

■

CHECK DAMAGED PARTS. Before further use of the 
tool, a guard or other part that is damaged should be 
carefully checked to determine that it will operate 
properly and perform its intended function. Check for 
alignment of moving parts, binding of moving parts, 
breakage of parts, mounting and any other conditions 
that may affect its operation. A guard or other part that 
is damage must be properly repaired or replaced by an 
authorized service center to avoid risk of personal 
injury.

■

KEEP TOOL DRY, CLEAN, AND FREE FROM OIL 
AND GREASE. Always use a clean cloth when 
cleaning. Never use brake fluids, gasoline, petroleum-
based products, or any solvents to clean tool.

■

INSPECT POWER SUPPLY AND EXTENSION 
CORDS periodically and, if damaged, have repaired by 
a qualified service technician. Stay constantly aware of 
cord location and keep it well away from the rotating 
wheel.

■

NEVER USE IN AN EXPLOSIVE ATMOSPHERE. 
Normal sparking of the motor or sparking from grinding 
metal could ignite fumes.

■

USE OUTDOOR EXTENSION CORDS. Use only 
extension cords with approved ground connection that 
are intended for use outdoors and so marked.

■

NEVER reach to pick up a workpiece, a piece of scrap, 
or anything else that is in or near the grinding path of 
the wheel.

■

AVOID AWKWARD OPERATIONS AND HAND 
POSITIONS where a sudden slip could cause your 
hand to move into the wheel. ALWAYS make sure you 
have good balance.

■

NEVER stand or have any part of your body in line with 
the path of the wheel.

■

DO NOT USE TOOL IF SWITCH DOES NOT TURN IT 
ON AND OFF. Have defective switches replaced by an 
authorized service center.

■

DO NOT TURN THE MOTOR SWITCH ON AND OFF 
RAPIDLY. This could cause the wheel to loosen and 
could create a hazard. Should this ever occur, stand 
clear and allow the wheel to come to a complete stop. 
Disconnect your grinder from the power supply and 
securely retighten the wheel nut.

 WARNING:

When servicing use only identical replacement parts. Use 
of any other parts may create a hazard or cause product 
damage.

■

USE ONLY FLANGES supplied with this bench 
grinder.
IF ANY PART OF THIS GRINDER IS MISSING or 
should break, bend, or fail in any way, or should any 
electrical component fail to perform properly, shut off 
the power switch, remove the machine plug from the 
power source and have damaged, missing, or failed 
parts replaced before resuming operation.

■

MAKE SURE THE GRINDING WHEEL IS SECURELY 
MOUNTED as described in the operating instructions 
before connecting the tool to a power supply.

■

DO NOT OVERTIGHTEN THE WHEEL NUT, 
excessive tightening can cause the wheel to crack 
during operation.

■

INSPECT GRINDING WHEEL for visible defects. 
Check the wheel for fissures and cracks, and test for 
normal operation prior to use.

■

ADJUST distance between wheel and work rest to 
maintain 1.6 mm. or less separation as the diameter of 
the wheel decreases with use. The value of separation 
used in the marking is to be the separation 
recommended by the manufacturer but shall not be 
more than 3.2 mm.